295Likes

Tamiya mini cooper

Reply Subscribe

Thread Tools

Search this Thread

09-28-2009 | 06:15 AM

#10291

CARD

Tech Regular

iTrader: (10)

Joined: Jan 2008

Posts: 347

From: Pearl of Oriental

speedy gears

Quote:

Originally Posted by mcdogboy

Got a set on the way to chuck in the m04 to give it some more legs, will know then how different they look from a teching perspective.

Hmm... good to know there is another RWD tourer... Any update on the fast gear in M04 handling? With lower torque(higher speed...), more controllable?!

09-28-2009 | 06:18 AM

#10292

CARD

Tech Regular

iTrader: (10)

Joined: Jan 2008

Posts: 347

From: Pearl of Oriental

Quote:

Originally Posted by gtfour93

I used all the TAMIYA parts since the ABC upper & lower ball ends are different sizes. They were bigger on top & smaller on the bottom, compare to TAMIYA's one size. Also, there was no way to use the TAMIYA upper ball end on the Genetic chassis because it's a screw-in type, so I had some spare TA02 threaded ball ends that were used for a better solution.

Urr... not really good in composing these datas in my mind into actual...

Pictures...?! Please?!

Thanks in advance...

09-28-2009 | 09:09 AM

#10293

dannyboy15

Tech Initiate

Joined: Aug 2009

Posts: 41

From: england

Quote:

Originally Posted by tony gray

For all those people who have sent in Minifans pics to us at rc-mini and have been waiting for an eternity to see them..

Well we've finally re-done the Minifans section. And it's all-new and hi-tech!

Check it out now.

YAY

i got a better pic that that now its in the air heading to a wall XD
and it isnt a drag mini no more

09-28-2009 | 09:14 AM

#10294

dannyboy15

Tech Initiate

Joined: Aug 2009

Posts: 41

From: england

also is there a way to stop the inside wheel spinning round a corner on a mo3?
thanks in advance

09-28-2009 | 09:20 AM

#10295

monkeyracing

R/C Tech Elite Member

iTrader: (10)

Joined: Mar 2008

Posts: 6,305

From: Calgary, AB

The best thing you could do is to try to lock up the differential a bit. This will transfer power to the outside wheel.

Jim

09-28-2009 | 09:21 AM

#10296

dannyboy15

Tech Initiate

Joined: Aug 2009

Posts: 41

From: england

Quote:

Originally Posted by monkeyracing

The best thing you could do is to try to lock up the differential a bit. This will transfer power to the outside wheel.

Jim

how do you do that because im still a novice

09-28-2009 | 09:22 AM

#10297

gashuffer

Tech Champion

iTrader: (48)

Joined: Nov 2006

Posts: 5,230

From: RcVille

Quote:

Originally Posted by tony gray

Check it out now.

Where can I get one of those mini wagon bodies from? Like the one in the top left pic. Is that a Genetic body??

09-28-2009 | 09:25 AM

#10298

dannyboy15

Tech Initiate

Joined: Aug 2009

Posts: 41

From: england

Quote:

Originally Posted by gashuffer

Where can I get one of those mini wagon bodies from? Like the one in the top left pic. Is that a Genetic body??

from what iv seen on ebay it is a ABC Mini Traveller Bodyset
( http://cgi.ebay.co.uk/ABC-Mini-Trave...d=p3286.c0.m14 )

09-28-2009 | 11:02 AM

#10299

gashuffer

Tech Champion

iTrader: (48)

Joined: Nov 2006

Posts: 5,230

From: RcVille

Just slapped together my M-05 and the friction dampers really suck Ballzz. Ordered a set of TRF's. With the stock shocks you might as well stick a po-go stick under it

Last edited by gashuffer; 09-28-2009 at 02:08 PM.

09-28-2009 | 03:06 PM

#10300

mcdogboy

Tech Adept

iTrader: (2)

Joined: Jul 2009

Posts: 134

Quote:

Originally Posted by CARD

Hmm... good to know there is another RWD tourer... Any update on the fast gear in M04 handling? With lower torque(higher speed...), more controllable?!

Not yet, it's still wending it's way from Hong Kong.

09-28-2009 | 04:07 PM

#10301

gtfour93

Tech Addict

iTrader: (22)

Joined: Feb 2009

Posts: 658

Quote:

Originally Posted by gashuffer

Where can I get one of those mini wagon bodies from? Like the one in the top left pic. Is that a Genetic body??

There is also a Mini Pickup available from ABC Hobby.

09-29-2009 | 01:51 PM

#10302

tony gray

Tech Elite

iTrader: (7)

Joined: Jun 2002

Posts: 3,549

From: Melbourne, Australia. Home of rc-mini.net

OK, we all know the HPI Switch turned out to be a real dud of a car
(Hence the expression - "My car is a real bucket of Switch")

But...if nothing else they've provided something decent in the way of new bodyshells.

Check out this latest 210mm release from HPI, the stunning Alfa Mito. Oh man do I want one of these.

(Only in complete form at the moment but the bodyshell by itself shouldn't be too far off.)

09-29-2009 | 03:03 PM

#10303

gashuffer

Tech Champion

iTrader: (48)

Joined: Nov 2006

Posts: 5,230

From: RcVille

Can someone tell me what the bearing sizes are for a m-05 non pro with plastic rear uprights? I was checking out Avid and they have some nice stuff and cheap. 1 dollar bearings.

09-29-2009 | 04:31 PM

#10304

monkeyracing

R/C Tech Elite Member

iTrader: (10)

Joined: Mar 2008

Posts: 6,305

From: Calgary, AB

The information is all right there for you.

1150 x 12, 850 x 6

Quote:

Originally Posted by tony gray

OK, we all know the HPI Switch turned out to be a real dud of a car
(Hence the expression - "My car is a real bucket of Switch")

I didn't even realize they continued to make the Switch after the first week or two of crap reviews. Never seen one here and it's not even listed on HPI's N. American website. One other thing about HPI, is it just me or when they were designing the E10, did they completely rip off the TT-01 or what?

Jim

09-29-2009 | 05:35 PM

#10305

gashuffer

Tech Champion

iTrader: (48)

Joined: Nov 2006

Posts: 5,230

From: RcVille

Quote:

Originally Posted by monkeyracing

The information is all right there for you.

1150 x 12, 850 x 6

I know that but what is the size 5x10? 5x8? etc.

Jim

I know that but what is the size 5x10? 5x8? etc.