2LikesGo-Tech Engines Thread
06-24-2009 | 03:50 AM
#7412
which jp pipe would you guys suggest?
i know there are other pipes but ??????[/QUOTE]
i know a few who run the 7 port go tech and use the jp 4 pipes still good power and getting 11 mins run time
i know there are other pipes but ??????[/QUOTE]
i know a few who run the 7 port go tech and use the jp 4 pipes still good power and getting 11 mins run time
06-24-2009 | 04:11 AM
#7413
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
If your getting one for nothing give the JP pipe a try, but I wouldn't buy one for a GO. Like Pato said, they don't combine well with the GO engines. Buy a GO 2072 and stand back
but after seeing a 7 port go he was using a jp 4 pipe with good run time and power
06-24-2009 | 06:38 AM
#7416
well i only use MM motors if i have a moded in my buggy which is insane with 2072 pipe you wouldnt be diapointed i i havent tried the ebmods bit i guess it would be up to you depending where you live if in australia MM 
excellan customer service
excellan customer service
06-24-2009 | 07:32 AM
#7417
i have 2 of them here, the "new" one i was running and a spare that really needs a repinch. the new one i think the block and carb are throw away, when trying to remove the carb i was having alot of difficulty getting it to budge so out came the vise grips so the carb is for all intents ruined and it still hasnt moved.
Shipping the 2 of them in the us via priority mail would be about 7-8 bucks so any offer over that i will consider, the "new" one doesnt even have any scratches on the head and the glow plug is still good.
they are the blue head b21's
Shipping the 2 of them in the us via priority mail would be about 7-8 bucks so any offer over that i will consider, the "new" one doesnt even have any scratches on the head and the glow plug is still good.
they are the blue head b21's
06-24-2009 | 12:11 PM
#7419
Joined: Sep 2008
Posts: 2,767
From: Pleasant View TN
Well guys, from what we have gleaned out of a few people, it would be a fairly safe bet that these GX motors are the new Gen 6 version ?? Improved cooling head, Gen 5.5 carb (maybe improved some more - maybe a short LSN needle), Ti Ni coated 5.5 crank and wrist pin, perhaps an improved and modified rod ? - not sure.
That should keep everyone in suspense for a while until we find out more
That should keep everyone in suspense for a while until we find out more
Massive Modds?Racefactor? anyone taking backorders.....damn i cant wait
06-24-2009 | 12:16 PM
#7420
I have a gen 4 5port ebmodded, it is a handful to say the least. Just put in a new conrod and wrist pin after 2 gallons. It really screams. My next engine will be a gen 6 from mmods. I have heard nothing but good things about mark and massive mods. Ed bridges is no slouch either when it comes to doing up these engines.
06-24-2009 | 12:47 PM
#7421
Tech Addict
Joined: Jan 2007
Posts: 715
From: AUCKLAND NEW ZEALAND
Well guys, from what we have gleaned out of a few people, it would be a fairly safe bet that these GX motors are the new Gen 6 version ?? Improved cooling head, Gen 5.5 carb (maybe improved some more - maybe a short LSN needle), Ti Ni coated 5.5 crank and wrist pin, perhaps an improved and modified rod ? - not sure.
That should keep everyone in suspense for a while until we find out more
That should keep everyone in suspense for a while until we find out more
06-24-2009 | 01:45 PM
#7422
ebmods 5 port is nice i run the race tuned in truggy but if you are putting in buggy then fully mod will be great in there. i have never ran mm motor but from what the guys on here say they rip too. but i love my ebmods motor gets good run times and lots or power
