Tekin RS ESC sensored
#2506
Hey,
The preffered 17.5 setup in 1/12 and TC is 0 degrees of motor timing and Full boost which is 30 degrees.
Bob, if you run your "dual" mode timing at 100 this will render 30 degrees also in case you have a sensor cable come out again. This will almost match the timing in the above setup so you don't lose too much speed.
The preffered 17.5 setup in 1/12 and TC is 0 degrees of motor timing and Full boost which is 30 degrees.
Bob, if you run your "dual" mode timing at 100 this will render 30 degrees also in case you have a sensor cable come out again. This will almost match the timing in the above setup so you don't lose too much speed.
#2507
.
Last edited by Josh Keller; 09-26-2009 at 06:55 PM.
#2508
Does anyone have any timing suggestions for 1S LiPo 13.5 and 17.5 oval? I read that the on-road guys were running full timing on the motor (24 degrees for Tekin) and 0 boost.
I'm just looking for a good starting point.
I was told to rollout at 4.00 for 13.5 and 4.50 for 17.5, if that helps.
135 foot run-line, flat, carpet.
Thanks,
Josh
I'm just looking for a good starting point.
I was told to rollout at 4.00 for 13.5 and 4.50 for 17.5, if that helps.
135 foot run-line, flat, carpet.
Thanks,
Josh
#2509
Suspended
Hey,
The preffered 17.5 setup in 1/12 and TC is 0 degrees of motor timing and Full boost which is 30 degrees.
Bob, if you run your "dual" mode timing at 100 this will render 30 degrees also in case you have a sensor cable come out again. This will almost match the timing in the above setup so you don't lose too much speed.
The preffered 17.5 setup in 1/12 and TC is 0 degrees of motor timing and Full boost which is 30 degrees.
Bob, if you run your "dual" mode timing at 100 this will render 30 degrees also in case you have a sensor cable come out again. This will almost match the timing in the above setup so you don't lose too much speed.
I recently bought two rs pro speedo's and wanted to know. How do I get the 189 software and do the 17.5 redline motors have adjustable timing? Also what is the best set up for 17.5 touring car?
#2510
I too just bought 2 RS ESC's!!! I bought 1 speedo by itself and the other esc and 17.5 combo. the 17.5 does have the ajustable timing on it and it doe make a big difference.
#2511
kyosho player -
for the 17.5 I have been using the Novak setup which is 3.5-FDR, I couldnt get the right gearing in time for this past weekend and was using 4.0 with the timing advanced. the car was very smooth, I started with the mild profile and proceeded to the aggressive profile. I'm really happy with the RS ESC
for the 17.5 I have been using the Novak setup which is 3.5-FDR, I couldnt get the right gearing in time for this past weekend and was using 4.0 with the timing advanced. the car was very smooth, I started with the mild profile and proceeded to the aggressive profile. I'm really happy with the RS ESC
#2512
Right now the team is really liking the 0 motor timing full boost timing setup using 189.
Anyone seeking 189 need only e mail me for it letting me know were you race/live so I can point out any team guys in your area:
[email protected]
Anyone seeking 189 need only e mail me for it letting me know were you race/live so I can point out any team guys in your area:
[email protected]
#2513
Suspended
kyosho player -
for the 17.5 I have been using the Novak setup which is 3.5-FDR, I couldnt get the right gearing in time for this past weekend and was using 4.0 with the timing advanced. the car was very smooth, I started with the mild profile and proceeded to the aggressive profile. I'm really happy with the RS ESC
for the 17.5 I have been using the Novak setup which is 3.5-FDR, I couldnt get the right gearing in time for this past weekend and was using 4.0 with the timing advanced. the car was very smooth, I started with the mild profile and proceeded to the aggressive profile. I'm really happy with the RS ESC
#2514
Hi, could anyone tell me if i wonder using low KVs sensorless motor from any brand, then which 1 esc of Tekin could make better performance: R1 Pro or RS Pro?
Best regards
Best regards
#2515
Mac,
If you're going to run sensorless motors the R1 Pro and RS Pro will be virtually the same. I always recomend using the right esc for the application and since you're going to go sensorless get ther R1 Pro.
If you're going to run sensorless motors the R1 Pro and RS Pro will be virtually the same. I always recomend using the right esc for the application and since you're going to go sensorless get ther R1 Pro.
#2516
Thanks for your confirm.
#2517
Tech Elite
iTrader: (87)
Just an idea, but if I was going out and buying a brand new esc, I would spend the extra 20 or 30 and get the RS, but my wife also has me on a tight rope, so I always look at resale. If you look at the for sale forun on here, anything tekin goes in a matter of minutes. Like I said this is just my opinion.
#2518
Right now the team is really liking the 0 motor timing full boost timing setup using 189.
Anyone seeking 189 need only e mail me for it letting me know were you race/live so I can point out any team guys in your area:
[email protected]
Anyone seeking 189 need only e mail me for it letting me know were you race/live so I can point out any team guys in your area:
[email protected]
Lastly what does the motor come from the factory with timing wise?
#2519
Tech Elite
iTrader: (2)
Randy I've got a couple folks here that run the tekin redline motor and were wondering how do i tell where the timing is? I saw the degree marks on the sticker but what is the key on the endbell to line up w/ the marks on the sticker?
Lastly what does the motor come from the factory with timing wise?
Lastly what does the motor come from the factory with timing wise?
#2520
Tech Initiate
Hi guys,
Are there anybody who has experience with the speedo combined with a Corally BL motor?
Are they works perfectly together?
Thank You
Are there anybody who has experience with the speedo combined with a Corally BL motor?
Are they works perfectly together?
Thank You