Community
Wiki Posts
Search

Drifting

Thread Tools
 
Search this Thread
 
Old 08-30-2008 | 04:12 PM
  #61  
drewbal's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jul 2008
Posts: 255
From: Denver Co,
Default

sweet cant wait
drewbal is offline  
Old 09-01-2008 | 02:17 AM
  #62  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

k, we need to decide for saturday where we want to meet. we could do a freshly paved parking lot, tennis court or hockey court
mr4tcsdrifter is offline  
Old 09-01-2008 | 10:57 PM
  #63  
drewbal's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jul 2008
Posts: 255
From: Denver Co,
Default

ok i know of two hockey rinks we can go to the right of 116th by the promanad in westminster/bromfield if we get there around 830 9am im sure no one is there we can meet up at the bowling alley or the ice skateing rink as we would have to drive about 4 blocks as i dont know the exact address to the park but its not far at all

im going to bring my pit table tools and gen so we should be set if we can all bring some cons for a course ive got chalk already what else do we need?????
drewbal is offline  
Old 09-01-2008 | 11:53 PM
  #64  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

im there..any1 else? str8?
mr4tcsdrifter is offline  
Old 09-02-2008 | 09:32 AM
  #65  
str8.krooked's Avatar
Tech Fanatic
iTrader: (8)
 
Joined: Aug 2008
Posts: 763
From: Highlands Ranch, CO
Default

I'll be there, but I don't know the area well. Can we meet at a definate location? Reply with an address and I'll map quest it and plan on being there around 9:am.
str8.krooked is offline  
Old 09-02-2008 | 09:34 AM
  #66  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

k, drew, find an address
mr4tcsdrifter is offline  
Old 09-02-2008 | 10:27 AM
  #67  
str8.krooked's Avatar
Tech Fanatic
iTrader: (8)
 
Joined: Aug 2008
Posts: 763
From: Highlands Ranch, CO
Default

I hate to do this, but I have to drop out of practice. I'll be at Banimere, but I'll have to show up cold. Sorry guys, I just had something come up last minute and I won't be able to make it on the 6th.
str8.krooked is offline  
Old 09-02-2008 | 10:28 AM
  #68  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

what about friday evening?
mr4tcsdrifter is offline  
Old 09-02-2008 | 09:32 PM
  #69  
Dirk Diggler's Avatar
Tech Regular
 
Joined: Sep 2007
Posts: 333
Default

what do i need to make one of my xrays drift and how much
Dirk Diggler is offline  
Old 09-02-2008 | 09:57 PM
  #70  
d
Tech Initiate
 
Joined: Nov 2007
Posts: 38
Default

Originally Posted by str8.krooked
I hate to do this, but I have to drop out of practice. I'll be at Banimere, but I'll have to show up cold. Sorry guys, I just had something come up last minute and I won't be able to make it on the 6th.
so what club do you race for???
d is offline  
Old 09-03-2008 | 02:03 AM
  #71  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

Originally Posted by Dirk Diggler
what do i need to make one of my xrays drift and how much
you can pick up a set of yokomo single rings from htw or hpi hard rubber drift tires. i think they have the yokomo hard rubber also. thats pretty much it
mr4tcsdrifter is offline  
Old 09-03-2008 | 05:29 AM
  #72  
Tech Master
 
Joined: Jun 2004
Posts: 1,355
From: Colorful Colorado
Default

Originally Posted by Dirk Diggler
what do i need to make one of my xrays drift and how much
I have heard that you can use pipe over your tires I've heard that they use ABS or PVC? Not sure you may check into it, if so I know a guy with some extra ABS


Drift guy's I spoke with Brian about getting you some Road Rail to use for your exhibition meets. I'm still working on getting that stuff together. However it will probably be after the Bandimere meet...
RRacerRuss1 is offline  
Old 09-03-2008 | 08:08 AM
  #73  
str8.krooked's Avatar
Tech Fanatic
iTrader: (8)
 
Joined: Aug 2008
Posts: 763
From: Highlands Ranch, CO
Default

Originally Posted by mr4tcsdrifter
what about friday evening?
I hate to do this to everyone, but it would have to be close to my house here in South Denver on Friday evening. Maybe that parkinglot I mentioned. I have a touchy household right now, so taking time to drift is harder than usual. What about 8m at the liquor store I mentioned above?

Also, for everyone on our "team" I have several sets of "sushi" drift tires. They are ABS and work nicely. Anyone who shows up to drift is welcome to have a set (until I run out).

What's our team name going to be??? We should have one before we go to Bandimere. I could also host a website for us if we get up and running.
str8.krooked is offline  
Old 09-03-2008 | 09:07 AM
  #74  
mr4tcsdrifter's Avatar
Thread Starter
Tech Elite
iTrader: (45)
 
Joined: Jul 2007
Posts: 2,589
From: Queen Creek, AZ
Default

thats one thing i wanted to discuss there was a team name. i thought of a couple but one that sounds good, team D 303. what do ya think
mr4tcsdrifter is offline  
Old 09-03-2008 | 01:08 PM
  #75  
Tech Rookie
 
Joined: Sep 2008
Posts: 6
Default

It's a good idea to practice before the meet on Sunday, and it's better to know any1 a bit.

I'm free after 6pm tomorrow, my cell 720 278 5113. if any1 down give me a call so we can find a place to meet.
grenadeking is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.