Schumacher Corner
Hey marcos How about this one if the guy does sell it as a roller? It looks different like the bumper brace is white and the shock towers look white too but if you look closely the slots were the esc and reciever go are there.
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
Super Moderator
iTrader: (239)
Hello all Schuie drivers....
I am working right now with Larry at Team Tamale to make us some trick custom parts to make our car beefier. Have you ever bent a camber link mount? How about some hinge pins? Well, with our fearless Yoda Goetz designing the parts, Tamale making them, our car will be that much stronger…..
I will get some pics of what we will be making, but basically I will be selling a “suspension upgrade kit” that will consist of
- front and rear camber link mounts, (replacing U3133)
- 4 hinge pins (replacing U3142)
- front and rear alloy blocks (replacing U3129,U3130) .
- HPI balls, and ball cups for camber link mounts.
I will also be anodizing them – not sure on color, but I was thinking black or our traditional purple.
Cost will be anywhere from $75-100. It will all depend on how many preorders I get, and what the cost of anodizing will come out to.
I will get pics out shortly, but let me know your thoughts/feedback.
McGoo
I am working right now with Larry at Team Tamale to make us some trick custom parts to make our car beefier. Have you ever bent a camber link mount? How about some hinge pins? Well, with our fearless Yoda Goetz designing the parts, Tamale making them, our car will be that much stronger…..
I will get some pics of what we will be making, but basically I will be selling a “suspension upgrade kit” that will consist of
- front and rear camber link mounts, (replacing U3133)
- 4 hinge pins (replacing U3142)
- front and rear alloy blocks (replacing U3129,U3130) .
- HPI balls, and ball cups for camber link mounts.
I will also be anodizing them – not sure on color, but I was thinking black or our traditional purple.
Cost will be anywhere from $75-100. It will all depend on how many preorders I get, and what the cost of anodizing will come out to.
I will get pics out shortly, but let me know your thoughts/feedback.
McGoo
how about 3 degree caster blocks?
Super Moderator
iTrader: (239)
Hey marcos How about this one if the guy does sell it as a roller? It looks different like the bumper brace is white and the shock towers look white too but if you look closely the slots were the esc and reciever go are there.
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
Tech Master
iTrader: (12)
Super Moderator
iTrader: (239)
Tech Master
iTrader: (16)
Tech Champion
iTrader: (4)
Hey marcos How about this one if the guy does sell it as a roller? It looks different like the bumper brace is white and the shock towers look white too but if you look closely the slots were the esc and reciever go are there.
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
http://cgi.ebay.com/ws/eBayISAPI.dll...id=p2759.l1259
Tech Champion
iTrader: (4)
R/C Tech Elite Member
iTrader: (37)
what you don't the signature yellow flames on the side?
Super Moderator
iTrader: (239)
Tech Elite
iTrader: (26)
Tech Champion
iTrader: (31)
Core UDC questions...
A few of you guys must use the Core-RC charger, right?
I just got mine, and a power supply. In the 6 years I've been out of RC, I've either gotten dumber (very possible) or things have gotten more complicated.
My power supply has 2 holes on top to stick banana plugs into. The Core charger has an attached cord with clips....but it also comes with a banana plug harness, and a place to plug that harness in (right next to the attached cord with clips). How the heck do I connect this thing to my PS? Can I use that harness? Do I need to replace the clips with banana plugs?
I'm very sorry if this is ridiculously simple to everyone. I'm new to lipo and dc chargers. Don't want to screw anything up. Thanks for your help!
I just got mine, and a power supply. In the 6 years I've been out of RC, I've either gotten dumber (very possible) or things have gotten more complicated.
My power supply has 2 holes on top to stick banana plugs into. The Core charger has an attached cord with clips....but it also comes with a banana plug harness, and a place to plug that harness in (right next to the attached cord with clips). How the heck do I connect this thing to my PS? Can I use that harness? Do I need to replace the clips with banana plugs?
I'm very sorry if this is ridiculously simple to everyone. I'm new to lipo and dc chargers. Don't want to screw anything up. Thanks for your help!