Community
Wiki Posts
Search
Like Tree2991Likes

1/12 forum

Thread Tools
 
Search this Thread
 
Old 01-24-2008 | 05:47 AM
  #28066  
MO Matrix 01's Avatar
Tech Fanatic
iTrader: (14)
 
Joined: Oct 2007
Posts: 825
From: STL
Default

Thanks Larry.

One more question- do any of you know of any indoor 1/12 tracks in the St. Louis area?
MO Matrix 01 is offline  
Old 01-24-2008 | 09:44 AM
  #28067  
Ferrarimk13's Avatar
Tech Addict
 
Joined: Jan 2008
Posts: 630
From: Staten Island, New York
Default

check RC411.com or Rc Driver's website as they have local track directories (google rc track directory) and you can find a bunch of tracks near you
Ferrarimk13 is offline  
Old 01-24-2008 | 09:59 AM
  #28068  
dgullickson's Avatar
Tech Champion
iTrader: (45)
 
Joined: Oct 2002
Posts: 7,638
From: I'm a Dork Fish
Default

Originally Posted by protc3
Are Axiom going to be at the birds? I would like to try a set
Sorry, we will not be attending.
dgullickson is offline  
Old 01-24-2008 | 02:40 PM
  #28069  
Tech Adept
iTrader: (12)
 
Joined: Jul 2007
Posts: 147
Default

can someone help me gear my direct drive with a 13.5 brushless. what is a good spur/pinion to start with or the correct gear ratio i want to reach?
yle00984 is offline  
Old 01-25-2008 | 10:34 AM
  #28070  
odpurple's Avatar
Tech Elite
 
Joined: Dec 2002
Posts: 2,192
From: San Francisco
Default

Originally Posted by yle00984
can someone help me gear my direct drive with a 13.5 brushless. what is a good spur/pinion to start with or the correct gear ratio i want to reach?
We usually use an 88 tooth spur for 13.5. From there you need to learn to calculate roll out. The formula I use is:
tire diameter x 3.14 x pinion / spur
A good place to start 13.5 roll out is around 63mm, but it depends on the size of the track what your final roll out should be.

For a detailed, if somewhat lengthy, explanation of roll out look up Scottrick's excellent post #27638 on this thread
odpurple is offline  
Old 01-25-2008 | 03:42 PM
  #28071  
Tech Apprentice
 
Joined: May 2007
Posts: 51
From: Antwerp, Belgium
Default

What is a good rollout for 19T racing (Orion V2, 12L4)? For a technical carpet track, medium bite.
potloodslijper is offline  
Old 01-25-2008 | 05:58 PM
  #28072  
AdrianM's Avatar
Tech Champion
iTrader: (4)
 
Joined: Aug 2001
Posts: 6,101
From: Saint Petersburg, FL
Default

Originally Posted by potloodslijper
What is a good rollout for 19T racing (Orion V2, 12L4)? For a technical carpet track, medium bite.
Try 50mm or 2.0". You may need to gear up from there. We run those motors around 55mm or 2.15" outdoors.
AdrianM is offline  
Old 01-25-2008 | 06:55 PM
  #28073  
Scottrik's Avatar
Tech Champion
iTrader: (264)
 
Joined: Sep 2004
Posts: 6,409
From: Billings, MT
Default

Originally Posted by odpurple
For a detailed, if somewhat lengthy, explanation of roll out look up Scottrick's excellent post #27638 on this thread
HOLY GUACAMOLE BATMAN!!! Not only am I "quotable"...MICHAEL is quoting me!!

I can die fulfilled.
Scottrik is offline  
Old 01-25-2008 | 08:22 PM
  #28074  
odpurple's Avatar
Tech Elite
 
Joined: Dec 2002
Posts: 2,192
From: San Francisco
Default

Originally Posted by Scottrik
HOLY GUACAMOLE BATMAN!!! Not only am I "quotable"...MICHAEL is quoting me!!

I can die fulfilled.
Well, that was one hell of a quotable post
odpurple is offline  
Old 01-25-2008 | 09:17 PM
  #28075  
wallyedmonds's Avatar
Tech Elite
 
Joined: Jul 2006
Posts: 3,662
From: Brampton ont canada
Default

Originally Posted by MO Matrix 01
I'm interested in running 1/12 sooner or later.

My question or questions are as follows:

What is a good kit at a decent price (brand new)?
And what is a good kit at a decent price for a used car?

What electronics will be best (brushed, brushless, cells, etc.)?

I know these would apply to different tracks, but what is a good tire to start out with?

I'll probably have more once I get one, but I suppose this will suffice for now.


Thanks in advance!!!
car gen-x
servo jr
spedo 007 sphere comp
motor 10.5 novak 12.3 rotor (comes with it and stay with it)
tires to start pink rear's,purple fronts
crc high rollers or jaco
battery's ENER-G by SMC
wallyedmonds is offline  
Old 01-26-2008 | 09:28 AM
  #28076  
chris moore's Avatar
Tech Elite
iTrader: (96)
 
Joined: Mar 2004
Posts: 3,880
From: Phx AZ
Default

Originally Posted by MO Matrix 01
I'm interested in running 1/12 sooner or later.

My question or questions are as follows:

What is a good kit at a decent price (brand new)?
And what is a good kit at a decent price for a used car?

What electronics will be best (brushed, brushless, cells, etc.)?

I know these would apply to different tracks, but what is a good tire to start out with?

I'll probably have more once I get one, but I suppose this will suffice for now.


Thanks in advance!!!
Right now is a great time to be in 1/12 in some parts of the country its growing in popularity again. The answers you've received are solid so I'll address the used question. You indicated that your looking for a carpet track so I would suggest that you look for a link type car as opposed to a t-bar style. You should be able to find a CRC Gen-X roller for less than $200 or a 3.2ck for under $150. There are other brands like speedmerchant, and BMI that you might also take a look at.

You might want to look at the results of the upcomming "birds" race, that will tell you what the pros/fast guys are running on carpet. And keep in mind what brands your lhs supports, online is allways an option but not as convient.
chris moore is offline  
Old 01-26-2008 | 03:07 PM
  #28077  
Ike's Avatar
Ike
Tech Master
iTrader: (8)
 
Joined: Jan 2004
Posts: 1,228
From: Milwaukee, WI
Default

Has anyone done some serious testing to see how a good 27T stock compares to a 17.5 with proper gearing for both?
Ike is offline  
Old 01-26-2008 | 03:11 PM
  #28078  
wallyedmonds's Avatar
Tech Elite
 
Joined: Jul 2006
Posts: 3,662
From: Brampton ont canada
Default

Originally Posted by Ike
Has anyone done some serious testing to see how a good 27T stock compares to a 17.5 with proper gearing for both?
there very close
like 19t and 10.5
wallyedmonds is offline  
Old 01-26-2008 | 04:45 PM
  #28079  
Bob-Stormer's Avatar
Tech Elite
iTrader: (8)
 
Joined: Dec 2001
Posts: 3,525
From: Glasgow, Montana USA
Default

Originally Posted by Scottrik
HOLY GUACAMOLE BATMAN!!! Not only am I "quotable"...MICHAEL is quoting me!!

I can die fulfilled.
I was more impressed that any of us knew the correct way to spell "guacamole".
Bob-Stormer is offline  
Old 01-26-2008 | 04:50 PM
  #28080  
Tech Champion
 
Joined: Nov 2001
Posts: 7,191
From: Hawaii, USA
Default

Originally Posted by Bob-Stormer
I was more impressed that any of us knew the correct way to spell "guacamole".
Spell checker works wonders Probably wrote it in MS Word and copy/pasted it over
InspGadgt is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.