Community
Wiki Posts
Search
Like Tree195Likes

Novarossi engines thread

Thread Tools
 
Search this Thread
 
Old 04-13-2007 | 04:49 AM
  #2041  
Tech Adept
 
Joined: Aug 2006
Posts: 130
From: South Africa
Default

I will normally clean my airfilters about 4 times before throwing away, sometimes less if they look dodgey. as long as you clean it from the inside out its fine as it wont push the dust into airfilter, i use denatured alcohol or petrol to clean my airfilters.
Delta9 is offline  
Old 04-13-2007 | 05:03 AM
  #2042  
Sirio2127's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jun 2005
Posts: 379
From: The land of two heads
Default

Provok, I don't pay 5 dollars for a filter. I don't use a filter one race and throw it away i throw them away when they are too dirty for my liking I don't wash them and use them agen. If you want my old filters shore show me the money and ill send them to you not a prob at all. At racing fuel did have some probs at first due to the oil mixture used causeing the engines inturnals to gum up. The oil type and mixture has now been changed and the old prob is not a prob any more and for one they no longer use the metal tin container they havent used them for a very long time. Do as you wish I'm not telling how or what to use and how to run your engines. Thats totaly up to you Best Regards Jeremy.
Sirio2127 is offline  
Old 04-13-2007 | 05:36 AM
  #2043  
team novarossi's Avatar
Tech Apprentice
 
Joined: Apr 2006
Posts: 73
From: The Netherlands
Default

Originally Posted by German Muscle
+1

I dont think Team Novarossi has had any exp with this engine as he is a On Road Driver
hehe correct...but in the next few weeks i'm visiting some off-road races here in italy for my work.
I'm gonna shoot some cool pics of the NR team drivers racing there buggy for advertisement material/website etc.

And it's a good oppertunety to look around then ey :P
team novarossi is offline  
Old 04-13-2007 | 06:01 AM
  #2044  
ALG
Tech Regular
 
Joined: Nov 2005
Posts: 371
From: LIMA PERU
Default

Originally Posted by Sirio2127
I don't under stand why you would need to totaly rebuild any unmoded good quality engine after only 4 galon's of fuel. If i don't get 10 gallons from an engine befor it needs a new piston and liner then i know i'm doing somthing wrong. A novarossi should last 8 to 10 gallons of fuel befor the piston and niner need to be replaced. Normaly to make an engine last that long you need to check the conrod and bearing for excess play and ware. Some people may think i'm running my engines ritch but i ashore you there not ritch or lean. There is a limet to paformance I constantly see people push engines well beyond its intended paformance boundres. All i can say is you should be able to get 10 gallons of fuel in run time from a novarossi piston and lniner and ruffly 3 maby 4 rod and bearing changes providing you use novarossi bearings and when you change the conrod replace the piston pin and clips at the same time every time you change the conrod. Never wash and reuse air filters if you have spent the money on a novarossi why save 5 bucks by useing a dirty filter and the wrong air filter oil. All ways use a quality fuel I use Vp racing At rc car fuel. But there are many outhers like werks whitelightning tornado coolpower/sidewinder and many more. Heat and dirt and dust is what are the bigest damages to any engine. You can get paformance with out running engines at crazy temps. No mods are needed to any novarossi engine all your doing is creating a unreliable engine. Stratagy is what win's races not stright line speed. Regards Jeremy.
Thks I will have it on mind.
ALG is offline  
Old 04-13-2007 | 12:49 PM
  #2045  
German Muscle's Avatar
Tech Addict
iTrader: (8)
 
Joined: May 2006
Posts: 557
Default

Originally Posted by team novarossi
hehe correct...but in the next few weeks i'm visiting some off-road races here in italy for my work.
I'm gonna shoot some cool pics of the NR team drivers racing there buggy for advertisement material/website etc.

And it's a good oppertunety to look around then ey :P
get some video of the Plus 2 367
German Muscle is offline  
Old 04-13-2007 | 02:28 PM
  #2046  
jeff1's Avatar
Tech Regular
 
Joined: Oct 2004
Posts: 378
Default

Nova has to many .12 engines, and I'm a bit confused in which one I get. I want the fastest one
353 Plus 2 seems to be the last, but its very expensive... its a waste of money? How about Plus "1" line? What's the fastest?

I forgot to mention. The engines must be IFMAR legal

Thanks a lot!
jeff1 is offline  
Old 04-13-2007 | 06:37 PM
  #2047  
MRX4-R03's Avatar
Tech Regular
iTrader: (-1)
 
Joined: Oct 2005
Posts: 318
From: SA,TX
Default

Originally Posted by jeff1
Nova has to many .12 engines, and I'm a bit confused in which one I get. I want the fastest one
353 Plus 2 seems to be the last, but its very expensive... its a waste of money? How about Plus "1" line? What's the fastest?

I forgot to mention. The engines must be IFMAR legal

Thanks a lot!
It is very expensive because it comes with 2 engines and other stuff,,but then again when you buy the 353 nova will come out with another engine next week that will be even faster and so on..
MRX4-R03 is offline  
Old 04-13-2007 | 06:50 PM
  #2048  
jeff1's Avatar
Tech Regular
 
Joined: Oct 2004
Posts: 378
Default

Originally Posted by MRX4-R03
It is very expensive because it comes with 2 engines and other stuff,,but then again when you buy the 353 nova will come out with another engine next week that will be even faster and so on..
Hmm.. yes very expensive for .12
Do know what engine comes together with Plus 2? This engine has some nice improvements over SCT, but I haven't seem one running..
jeff1 is offline  
Old 04-13-2007 | 08:15 PM
  #2049  
MRX4-R03's Avatar
Tech Regular
iTrader: (-1)
 
Joined: Oct 2005
Posts: 318
From: SA,TX
Default

Originally Posted by jeff1
Hmm.. yes very expensive for .12
Do know what engine comes together with Plus 2? This engine has some nice improvements over SCT, but I haven't seem one running..
Yea from what I heard it comes with this piece of junk:

The engine is not even listed in the catalog: It is just supposed to be a club engine!!
MRX4-R03 is offline  
Old 04-15-2007 | 05:10 AM
  #2050  
Sirio2127's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jun 2005
Posts: 379
From: The land of two heads
Default

I think you will be plesently suprised it may not look fancy but i'm shore novarossi is not silly and would not put an engine that dose not paform at least for club level events with there flag ship engines. I'm shore some one must of tested one by now???. If not we will be as soon as they arive. Regards Jeremy
Sirio2127 is offline  
Old 04-15-2007 | 05:36 AM
  #2051  
Tech Champion
iTrader: (10)
 
Joined: Mar 2006
Posts: 5,120
From: www.moorebankraceway.com
Default

Originally Posted by PROVK
INS-BOX is mandatory in Australia too and yes it does keep filters cleaner, I use like max 3 filters in 1/10 the whole season, I just wash them really well.

But for all the guys who use them one meet and throw them , as I said I will buy them off ya.

i throw my filters out after each day also. no point messign around cleaning them, they never get back to original. i also use the thicker motorbike airfilter oil so it makes it difficult to clean. i need to use either sugar soap or mineral turpentine and what i save in airfilters would be ofset int he cost of the cleaning agents if i re used them.
TomB is offline  
Old 04-15-2007 | 11:27 PM
  #2052  
gtrmx's Avatar
Tech Adept
 
Joined: Sep 2005
Posts: 230
From: Guadalajara, Mexico
Default

Anybody knows the part number for the +12SCT conrod?

Is is different from the NS/NSR conrod?
gtrmx is offline  
Old 04-16-2007 | 05:36 AM
  #2053  
Grinder's Avatar
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by gtrmx
Anybody knows the part number for the +12SCT conrod?

Is is different from the NS/NSR conrod?
The rod is the same. 17006
Grinder is offline  
Old 04-16-2007 | 06:41 AM
  #2054  
MRX4-R03's Avatar
Tech Regular
iTrader: (-1)
 
Joined: Oct 2005
Posts: 318
From: SA,TX
Default

Originally Posted by Grinder
The rod is the same. 17006
If it is the same, I thought the rods for th ns/nsr/plus 12 are 7601
MRX4-R03 is offline  
Old 04-16-2007 | 08:36 AM
  #2055  
SalvadoriRacing's Avatar
Tech Fanatic
 
Joined: Dec 2003
Posts: 928
From: Brazil, Sao Paulo
Default

Originally Posted by Grinder
The rod is the same. 17006
17006 is the front bearing (not for the SCT, only for the previous ones)

the conrod code is 07601 and yes it's the same conrod of NS/NSR series....
SalvadoriRacing is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.