Use the ride height adjustment collars on the shocks. Looks like you've got tons of room for agistment.

Like gigaplex said there is a lot of preload on your shock collars, there is about 2mm of preload on mine when rear end is sitting at a ride height of 5.2mm

All of us are adding +3mm under wing for body mount to raise the rear even more ..its a good amount of rake it maximizes steering

Your down stop screw is buried you need to back that all the way out and reset it that why your having trouble

Look

I think you mean up stop?

Yup , that’s thu up stop .

Thanks all , it was too much preload in the shocks , ran the collars back up and got the car down to 5.2 and 5.0 . Late night and tired eyes , I couldn’t see it .

Glad you figured it out. New cars have tons of adjustment but the shock collar is still probably the most adjusted piece of your car.

Programmed .

1257g as it sits.

bumper is on upside down

dammit , 😆

It should point up, better clearance over curbs and it sits at the right height to support the body