What size pistons are in those FT shocks?

These folks at RPM are a bunch of assclowns. I emailed them years ago asking if they would consider releasing axle housings for the Mad Force/FOXX/Crusher/ and now USA-1 platform which has been around for 20 YEARS and they wrote back stating that the truck wasn't "popular enough" to warrant making molds for but they'll happily release arms for a brand new platform with essentially 0 sales by comparison. LMAO, RPM can suck sand.

Hi guys
I'm completely new to this hobby so I started with an rtr and also got the mt10 roller from ebay to understand and enjoy building it from the ground . So I wanted to have a 4s system on it and got the motor and ESC that can take the load and my concern after reading a bit is the spur gear cause it's plastic , so I'm searching for a metal alternative and I thought the Kaiju might fit , will this work , do I have anything else to worry about , if the Kaiju metal spur gear doesnt work, is there another alternative , sorry for the long message but would really appreciate your help since I'm sure you guys have a lot more experience than me. Thanks again

What servo comes with the MT10?

online AE website lists a Reedy 2531MG Digital Metal Gear. Part# 27152. 294/347oz in torque.

My MT10 RTR came with Associated/Reedy RT1508 200oz-in, 25spline shaft. Part#27101 (discontinued).

Hope this helps. 'AC'

Hey everyone,

Now that the MT10 has been out for a bit, what are the best upgrades/replacements for:

- Tires and Rims
- Steering servo

My MT10 will arrive this week and the only upgrade I've purchased is the RPM arms.

RazorRC Thank you for your videos. Good stuff.