700LikesFlySky Noble NB4
11-12-2019 | 12:38 AM
#363
Tech Apprentice
Joined: Sep 2019
Posts: 54
Have anyone used the new Fgr4p receiver?
I am suffering from loss of signal with the fgr4s, the fgr4 was out of stock from HK and I found fgr4p on aliexpress from a reputable supplier.. I searched the flysky website and they have the fgr4p listed(in Chinese, not yet in English).
Any thoughts? Anyone tested it? I have ordered 5 of them.
Also, where do you connect the temp sensor on the fgr4s? I read somewhere on the i-bus port. Does otwork directly or do I need to do anything else for the temperature to be displayed on the transmitter?
I am suffering from loss of signal with the fgr4s, the fgr4 was out of stock from HK and I found fgr4p on aliexpress from a reputable supplier.. I searched the flysky website and they have the fgr4p listed(in Chinese, not yet in English).
Any thoughts? Anyone tested it? I have ordered 5 of them.
Also, where do you connect the temp sensor on the fgr4s? I read somewhere on the i-bus port. Does otwork directly or do I need to do anything else for the temperature to be displayed on the transmitter?
11-12-2019 | 03:33 AM
#364
Have anyone used the new Fgr4p receiver?
I am suffering from loss of signal with the fgr4s, the fgr4 was out of stock from HK and I found fgr4p on aliexpress from a reputable supplier.. I searched the flysky website and they have the fgr4p listed(in Chinese, not yet in English).
Any thoughts? Anyone tested it? I have ordered 5 of them.
Also, where do you connect the temp sensor on the fgr4s? I read somewhere on the i-bus port. Does otwork directly or do I need to do anything else for the temperature to be displayed on the transmitter?
I am suffering from loss of signal with the fgr4s, the fgr4 was out of stock from HK and I found fgr4p on aliexpress from a reputable supplier.. I searched the flysky website and they have the fgr4p listed(in Chinese, not yet in English).
Any thoughts? Anyone tested it? I have ordered 5 of them.
Also, where do you connect the temp sensor on the fgr4s? I read somewhere on the i-bus port. Does otwork directly or do I need to do anything else for the temperature to be displayed on the transmitter?
11-12-2019 | 09:25 AM
#365
Tech Adept
Joined: Oct 2019
Posts: 193
From: Limassol
QUOTE=BambooSword;15544036]There's SENS port. I think the sensor should plug in to that. Then go in to sensor menu and select display temperature.[/QUOTE]
On the fgr4s there is no SENS port, only i-bus and I assume that you connect the sensor to that port but I think someone here have done it and it worked but I do not rwmember, tha is why I am asking.
At about 50m I loose the signal on both of my fgr4s on the straight..
On the fgr4s there is no SENS port, only i-bus and I assume that you connect the sensor to that port but I think someone here have done it and it worked but I do not rwmember, tha is why I am asking.
At about 50m I loose the signal on both of my fgr4s on the straight..
11-12-2019 | 10:22 AM
#367
Tech Adept
Joined: Oct 2019
Posts: 193
From: Limassol
11-14-2019 | 09:54 AM
#371
11-16-2019 | 10:50 AM
#374
11-16-2019 | 10:51 AM
#375