469LikesTekno RC ET410 Thread
02-12-2019 | 10:02 PM
#827
Tech Adept
Joined: Dec 2018
Posts: 120
From: Salina, Ut
02-13-2019 | 06:46 AM
#828
Tech Apprentice
Joined: Dec 2018
Posts: 85
Exotek are selling thicker hingepins!
EB410 3.4MM HD HINGE PINS, 4 inner pins w/ bit - Exotek Racing
EB410 3.4MM HD HINGE PINS, 4 inner pins w/ bit - Exotek Racing
02-14-2019 | 05:00 PM
#832
Tech Regular
iTrader: (4)
Joined: Jan 2016
Posts: 318
Maiden'ed mine last night. 20/30/7 with box stock suspension setup, all the Trinity Aluminum upgrades and Tekno CF parts. Ran it on an indoor clay 1/8th scale layout and holy hell this thing is so fast and fun. Faster around the track (and more stable) than my EB48.4. No broken parts in 5 packs so i'm happy with that.
Was a test/tune day for a lot of 1/8th scale Nitro guys and they couldn't hang.
Thing that amazed me the most was how much steering it had. I've never had to reduce travel to make a car much easier to drive but full steering was too twitchy and hard to drive. Ended up about -20% travel and it was super stable and consistent. Jumps sooo smooth.
I'm hooked.
Was a test/tune day for a lot of 1/8th scale Nitro guys and they couldn't hang.
Thing that amazed me the most was how much steering it had. I've never had to reduce travel to make a car much easier to drive but full steering was too twitchy and hard to drive. Ended up about -20% travel and it was super stable and consistent. Jumps sooo smooth.
I'm hooked.
02-18-2019 | 10:26 PM
#834
looks nice! very clean! im talking myself into buying one now also, I see plenty of series and club races with the class now... at first i put it off because i didn't want to bash it, and there is plenty of race support now.
02-19-2019 | 09:46 AM
#835
Tech Apprentice
Joined: Dec 2018
Posts: 85
it took me a minut to cave just like @skinny_j but as with all things we caved and it has been a completely good time caving. Our track has a class now and it is a blast to race. Even just practicing with it is a blast
02-19-2019 | 05:06 PM
#836
Well, didn't see this one coming...
The wheels are Pro-Line's Renegades PRO2725-03 intended for use on the HPI Blitz, Ultima SC6, Jammin SCRT 10, and other RCs that use the Traxxas Slash (rear)/Slash 4x4 offset.
The problem? Tekno's wheel hexes are not wide enough and/or the Pro-Line wheels have too much material; making the wheel's socket too deep. When I go to tighten the wheel nuts, the extra plastic that is .41~.70mm above the wheel hex (in picture) rubs on the hubs. So annoying.
The wheels are Pro-Line's Renegades PRO2725-03 intended for use on the HPI Blitz, Ultima SC6, Jammin SCRT 10, and other RCs that use the Traxxas Slash (rear)/Slash 4x4 offset.
The problem? Tekno's wheel hexes are not wide enough and/or the Pro-Line wheels have too much material; making the wheel's socket too deep. When I go to tighten the wheel nuts, the extra plastic that is .41~.70mm above the wheel hex (in picture) rubs on the hubs. So annoying.
02-19-2019 | 05:12 PM
#837
Well, didn't see this one coming...
The wheels are Pro-Line's Renegades PRO2725-03 intended for use on the HPI Blitz, Ultima SC6, Jammin SCRT 10, and other RCs that use the Traxxas Slash (rear)/Slash 4x4 offset.
The problem? Tekno's wheel hexes are not wide enough and/or the Pro-Line wheels have too much material; making the wheel's socket too deep. When I go to tighten the wheel nuts, the extra plastic that is .41~.70mm above the wheel hex (in picture) rubs on the hubs. So annoying.
The wheels are Pro-Line's Renegades PRO2725-03 intended for use on the HPI Blitz, Ultima SC6, Jammin SCRT 10, and other RCs that use the Traxxas Slash (rear)/Slash 4x4 offset.
The problem? Tekno's wheel hexes are not wide enough and/or the Pro-Line wheels have too much material; making the wheel's socket too deep. When I go to tighten the wheel nuts, the extra plastic that is .41~.70mm above the wheel hex (in picture) rubs on the hubs. So annoying.
02-19-2019 | 06:36 PM
#839
Try some of the following.
Less front droop
More anti squat
Heavier rear spring and up 50 CST in rear oil
02-19-2019 | 08:39 PM
#840
Tech Apprentice
Joined: Dec 2018
Posts: 85
