2Likes

Rx482 range issue.

Reply Subscribe

Thread Tools

Search this Thread

08-04-2018 | 04:10 PM

#16

Nicko451

Thread Starter

Tech Apprentice

Joined: Jul 2018

Posts: 69

Quote:

Originally Posted by the rc guy

do you run a esc bec or a ubec. whats its voltage and are the rx plug for it ok?

Standard touring car setup. Everything is compatible.

08-04-2018 | 05:36 PM

#17

platgof

Tech Elite

iTrader: (4)

Joined: Aug 2012

Posts: 3,507

I think you got it wet somehow, or wiring. These are very good rx's. The only problem I had was when I caked it in mud, that was bad. But I kept blowing the mud and water out and it came back to life.

08-04-2018 | 07:11 PM

#18

JC3

Tech Master

iTrader: (8)

Joined: Feb 2018

Posts: 1,076

Take it apart and look closely inside for anything unusual.

08-04-2018 | 07:51 PM

#19

Nicko451

Thread Starter

Tech Apprentice

Joined: Jul 2018

Posts: 69

I'll have a look inside jc3.
it had issues from brand new, not a chance it's ever gotten wet since I've had it. Wires were all done by a RC shop.

08-06-2018 | 02:42 PM

#20

windellmc

Tech Master

iTrader: (4)

Joined: Feb 2002

Posts: 1,070

From: Greenwood, IN

Could just be a bad receiver. Maybe the internal antenna is bad or disconnected. Does anyone at your track have a spare you can try?

08-07-2018 | 02:00 AM

#21

Nicko451

Thread Starter

Tech Apprentice

Joined: Jul 2018

Posts: 69

I have a spare that I've tried. Went out today with 2 cars, 2 recievers and could not drive out of a 15m radius without losing signal. All I can think now is my transmittter.

JC3 likes this.

08-07-2018 | 09:57 PM

#22

Nicko451

Thread Starter

Tech Apprentice

Joined: Jul 2018

Posts: 69

I'm running a sanwa mt4 for the record .

08-09-2018 | 08:46 AM

#23

windellmc

Tech Master

iTrader: (4)

Joined: Feb 2002

Posts: 1,070

From: Greenwood, IN

Quote:

Originally Posted by Nicko451

I'm running a sanwa mt4 for the record .

seems likely. If you want to confirm need to ty another transmitter with your car/receiver. Make sure your transmitter doesn’t have a low power option. I think some countries (France maybe?) limit the transmitter power. If you have a low power model you may be stuck with the big antenna.

08-09-2018 | 05:42 PM

#24

Nicko451

Thread Starter

Tech Apprentice

Joined: Jul 2018

Posts: 69

I've not heard of low power option. Got a friend sending me his transmitter to test.

08-09-2018 | 11:54 PM

#25

Roelof

Tech Lord

Joined: Aug 2007

Posts: 14,052

From: Holland

In Europe for DSSS systems there is a law that it may not transmit with more than 10mW power while in the US it is 100mW. I believe with FHSS it is on both continents 100mW