Well I don't think HW makes a 2000kv motor so the 1900kv would be the next best. I doubt you'd feel a huge difference though especially if you just go up a tooth or two in pinion size

My final (FINAL SELECTIONS) 5...Driving me nuts for sure on what to pick? It will be ONE of these for sure

https://www.amainhobbies.com/hobbywi...020407/p520598

https://www.amainhobbies.com/tekin-r...tt2481/p637115

https://www.amainhobbies.com/castle-...108-03/p618574

https://www.amainhobbies.com/castle-...145-03/p587669

https://www.amainhobbies.com/hobbywi...010401/p520594

Well you know where my money would go lol. But I think any of those will put a smile on your face with every trigger pull just don't get the Mamba Monster 2. It's old, getting phased out by the MMX.

How is the fit with this Tekin being 77mm? Also, what does this package come with and do I need anything else with it (Battery connector etc.)? I will be using a T-plug. If you have a link for one, please send it. Thank you

https://www.amainhobbies.com/tekin-r...tt2481/p637115

It's going to be close to the ESC case but with the Tekin it is very easy to wire up.

Sorry I rushed through and didn't answer your other questions lol.

If you just need a Dean's for the ESC, these will work

https://www.amainhobbies.com/deans-m...-wsd1302/p3597


But if you need to wire a battery as well, then this will give you the male and female connections

https://www.amainhobbies.com/deans-u...-wsd1300/p3596

As for everything included with the combo, at the very least there should be a sensor wire included for the motor along with a manual and a bunch of stickers. There will be an ESC fan too but it might already be installed on the unit. I'm not entirely certain if Tekin provides power wires with their ESC's so it would be a good idea to get some 12 or 10 guage wire from your favorite wire maker. I like Tekin and TQ. But I can't find 12ga or lower from TQ right now. And I don't think 13ga would be appropriate for a truggy system.

https://www.amainhobbies.com/tekin-1...tt3013/p218990

Thank you

sold

Sorry, I meant fit PROPERLY. :P. Can u shoehorn it in there? Yes. When the chassis flexes will the ESC and motor rub? Yes. Is that a good thing? No.

finally got mine out today to bash on.
holy hell these things are tough. so impressed by tekno with this entire build. from the manual being absolutely DIALED. to the durability being bulletproof. tekno is a step above anything ive ever messed with.

Changed my order to the Hobbywing EZRun Max8 Waterproof Brushless ESC/Motor Combo (2200kV)

Canceled my Tekin and went back to HW *Hobbywing EZRun Max8 Waterproof Brushless ESC/Motor Combo (2200kV)

Anyone running Pro-Line 3.8 Mashers (#1189-11)?

I'd like to know how these tires are as well. I'm starting to dislike the trenchers I currently have. While they are ok for offroad stuff they truly suck everywhere else and the ballooning on anything above 1/4 throttle is quite irksome.