How about those wheels/tires? What part number are they?

Did you have any clearance issues putting them on the buggy?

I have a 8ight 3.0E that's not in use, I think it would make a great MT.... I'm gathering ideas and part info.

Will the xr8 fit?

I think I'll try a 2600kv hw motor on 4s... too much?

Yes.

I would stick with 2000-2200kv for 4S.

Thx^2

Are these .3 parts?

Will a Truggy sized motor fit? The hw 2250 is Truggy sized.

A really long motor can fit. Example is the TP power 4070 which is like 107mm long. There's a thread here by Overkill I think with the ET48. I believe the ESC will have to be relocated if you use a longer can.

Been thinking about getting a truggyish offroad rig. I would have liked to see the truggy chassis on this. Seems like the ET48 with buggy chassis and shorter rear dogbone.

The True Scale Ford Raptor body may be too wide. Meant for the Slash.

The REVO bodies should fit.

Which one did you get?

Here is a link to the wheels and tires.


http://www3.towerhobbies.com/cgi-bin...&I=LXBVDW&P=ML

No clearance issues.

I think Tekno fully expects this to be an option for folks who want to do just that...

If you look at the "MT410 Body Reference Chart," Tekno speaks to that directly. They list some bodies denoted with a "T" - "Requires truggy chassis and driveshafts (TKR5601 & TKR5676 or TKR5676A)

They even list the required parts for you, how cool is that?

Thanks mate.

Ill be building a buggy/mt soon! .....can't wait to get my bash on. I've been strictly racing my rigs for too long.

It's the MT body. The part number is on the bodies that can fit.

This is not the Truggy chassis. I believe the eb48/sl chassis.

A lot of them are. In the normal configuration, the maximum motor length is around 78mm. So all of the standard size truggy motors will fit.

Is this true for the eb48/sl chassis using a hw rx8?

The motor I'm looking to get is 74mm long.