you can try the mac 28 of hobao. go to winnie (swan hobbyshop) and bring your engine to test fit or call her 1st to check if she has a stock of the pull start.

Hi Everyone,

Which is a better option?

Thunder Tiger - MT4 G3, 1/8 scale or Losi - TEN SCTE Troy Lee Design (TLD), 1/10 scale

• Considering the following points:
• Durability (able to withstand some light bashing and hard landings)
• Smooth Handling (turnings, good traction, minimum flipping and rolling over etc.)
• Good after market parts support

Based on the following track conditions,

• Off Road/ Dirt Tracks
• Short/ Medium Grass Field
• Concrete Pavement
• BMX Skate Park
• Asphalt Road

Please advise.

Thanks!

Guys,

Would a slipper eliminator be a wrong idea for a stock (17.5) 1/10 4wd buggy? I've got a Yokomo yz-4 and found that exotec sells slipper eliminators for a stock 2wd buggies. the item description says they are good for stock 2wd but doesn't mention 4wd buggies...

Can anybody share some knowledge in for this matter?

Thanks

Hi,interested to do some rc drifting
anyone got any recomandations for a rc drift car?
and also where is a good shop to get the stuff at

Hi All! very new to this. Hope to go long with this hobby!

wtb best electric buggy off road...where can get in singapore...want to buy those best with complete set up

Hi guys! just got and old savage 25. Thinking of replacing the engine because the carb is jammed and there is noises in the piston shaft. Does winnie have a replacement engine?

I would just like to know if it is possible to swap the gxr18 to the KE25. I broke the connecting rod on the gxr18 and also the crankcase. I don't want to buy a new engine and not upgrade it at the same time. You can also give me other ideas on what engine i should put in it. Someone said it does fit straight on it, but i don't want to buy it and just waste money.

I am new and just bought my RTR.. is this forum still alive?

This is not a frequently updated forum. I think people look into more specific forums. There are particular forums for most car brands and also part specific ones e.g. orca Escs, Orion escs,turnigy motors etc.just to mention some.

Do you have any particular questions? I'm not a pro but have been in the hobby for a couple of years and know some stuff.

Cheers

Hello I am new to this hobby. Would be great to drift with some friends here.

Hi, I am new to this hobby, would like to get a new on road car and was wondering if anyone can help with some recommendation. Budget of about $500.

Hello everyone

I'm planing to by a TEKNO mt 410 for bashing i don't really have experience but I've read alot about.


It's a kit that comes without electronic and you need to build it step by step, many ppl enjoying that.

But im looking for a R/C shop to build that instead of dealing with something I have no experience with.


Any help would be appreciate it

best regards

^Most shops offer that service for a fee, just enquire.
It will take some time tho...

Thanks tho i talked with few they even have no idea what TEKNO is

but yeah will try more