USGT
|
|||
#4502
#4504
Ask your local RC Dealer, or give us a call.
#4505
Tech Initiate
Ne one!
Last edited by Matt Trimmings; 05-19-2016 at 09:29 PM.
#4506
#4508
We use Naphtha (Naptha) for tire cleaning. It's the main ingredient in lighter fluid. Have not had a problem with it softening rubber. Seems to work just great and it's inexpensive at the hardware store. In addition, it does a great job on cleaning black marks off the lexan bodies. Evaporates with no residue.
Last edited by Matt Trimmings; 05-19-2016 at 09:29 PM.
#4509
Tech Addict
iTrader: (5)
Rules interpretation question:
If I had a body that I did NOT want to put a rear wing on (for aesthetic purposes), would it be acceptable to put a flat lexan rear spoiler, 10mm above the rear most part of the body? Similar to what is allowed on USVTA cars that do not come with a molded rear spoiler.
Mark
If I had a body that I did NOT want to put a rear wing on (for aesthetic purposes), would it be acceptable to put a flat lexan rear spoiler, 10mm above the rear most part of the body? Similar to what is allowed on USVTA cars that do not come with a molded rear spoiler.
Mark
#4510
Rules interpretation question:
If I had a body that I did NOT want to put a rear wing on (for aesthetic purposes), would it be acceptable to put a flat lexan rear spoiler, 10mm above the rear most part of the body? Similar to what is allowed on USVTA cars that do not come with a molded rear spoiler.
Mark
If I had a body that I did NOT want to put a rear wing on (for aesthetic purposes), would it be acceptable to put a flat lexan rear spoiler, 10mm above the rear most part of the body? Similar to what is allowed on USVTA cars that do not come with a molded rear spoiler.
Mark
#4513
Tech Master
iTrader: (46)
If you are just racing local do what you want, but if you go to a large event and do better then some, assume they would throw a fit. I personally wouldn't care if you ran it, but I know a few years ago I ran a Tamiya Shaken some large events and that got some panties in a bunch.
#4515
Tech Elite
iTrader: (118)
We use Naphtha (Naptha) for tire cleaning. It's the main ingredient in lighter fluid. Have not had a problem with it softening rubber. Seems to work just great and it's inexpensive at the hardware store. In addition, it does a great job on cleaning black marks off the lexan bodies. Evaporates with no residue.
Other options are:
WD-40 / Liquid Wrench / 3-n-1 Oil - these actually oil up the rubber well
Mineral Spirits - cleans them off very well without oiling
Both of these also clean up your body very well.