4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
06-08-2014 | 01:40 PM
OK. But I know what my previous version was. Trying to figure out what the newest version should be
06-12-2014 | 06:23 PM
Tech Initiate
Joined: Oct 2010
Posts: 40
From: Brazil / SP
My setup used in last race:
10.5 Thuder Power
FDR 6,23 (Foam tires used! Rollout 28,23)
EndBell 25
Punch Rate 30/30
Boost 40
Start 6000
End 24500
Turbo 24
Full TH 0,3S
Tbo engage 18deg/0,1s
Tbo desengage 18deg/0,1s
Track is Fast (project for 1:8 cars), Motor temperature is good, 75C;
Good performance, maybe need more tork, next step try change Boost end RPM, 20 or 18000, suggestions is good!
Tks!
10.5 Thuder Power
FDR 6,23 (Foam tires used! Rollout 28,23)
EndBell 25
Punch Rate 30/30
Boost 40
Start 6000
End 24500
Turbo 24
Full TH 0,3S
Tbo engage 18deg/0,1s
Tbo desengage 18deg/0,1s
Track is Fast (project for 1:8 cars), Motor temperature is good, 75C;
Good performance, maybe need more tork, next step try change Boost end RPM, 20 or 18000, suggestions is good!
Tks!
06-13-2014 | 02:49 AM
Thread Starter
Tech Elite
Joined: Nov 2007
Posts: 3,338
Hi guys just making all the American end users aware that my friend Ron Schuur from Schurr speed on the westcoast of the us will be helping all Hobbywing users trackside so please see him whenever your at the track for any face to face help.
Remember you can always email me at [email protected]
Remember you can always email me at [email protected]
06-13-2014 | 02:52 AM
Thread Starter
Tech Elite
Joined: Nov 2007
Posts: 3,338
new version you will find on usb link V4.32 the usb link once your equipment is all connected will only allow you to download software that can be used on a particular esc and program box nothing else.
06-13-2014 | 04:57 AM
Tech Addict
iTrader: (1)
Joined: Aug 2005
Posts: 644
From: UK
hi COBRARACING, I sent you a PM a few weeks back, hadn't heard anything back. I'm guessing you have been pretty busy with the soon to be released hobbywing XERUN - V3.1 Sport Spec-Red BL ESC 100A Blinky?
Last edited by Bar; 06-13-2014 at 06:18 AM.
06-13-2014 | 06:41 PM
Joined: Aug 2008
Posts: 2,388
From: Medina, Ohio
06-14-2014 | 05:59 AM
!
06-15-2014 | 12:33 PM
Tech Addict
iTrader: (1)
Joined: Aug 2005
Posts: 644
From: UK
Send him an email.
[email protected]
A lot of times he doesn't get back to PM's. Email is better for him I guess. He should email you back right way though.
[email protected]
A lot of times he doesn't get back to PM's. Email is better for him I guess. He should email you back right way though.
06-18-2014 | 08:50 AM
Tech Apprentice
Joined: May 2009
Posts: 83
From: London
I used the new V10 17.5 (blinkey) last night and I must say that I'm quite impressed. For a motor that doesn't a big Kv rating it had a lot of acceleration and weren't to slow at the top end either. I raced at an indoor track that is 20m x 10m, geared at 4.08:1 and the motor came off at 72-75 degrees C.
07-06-2014 | 10:07 AM
Thread Starter
Tech Elite
Joined: Nov 2007
Posts: 3,338
v3.1 user manual
Hi guys
Please let me know if you guys want an easier user manual explanation for the v3.1 with this manual created by me you will understand the settings better.
Please email me at [email protected]
Regards your friend Always
Angelo
Please let me know if you guys want an easier user manual explanation for the v3.1 with this manual created by me you will understand the settings better.
Please email me at [email protected]
Regards your friend Always
Angelo