Palmaris engine thread
#1218
Just got back from Serpent Cup in Thailand.
Tried really hard but only managed to qualify B 1st ( finished 9th) and one other team mate qualified B 6th.( he finished 5th in B)
I was running 4th since I started with too big tires. I was catching 3rd guy toward 15 mnins (and less then 2 sec behind) before I had some pit lane issue so could not finish the race. End up 9th in the B.
I guess better luck next time
Overall, the BRB piston and sleeve was perfect. I had among the fastest engines, competing with other NovaMax 15's, and out accelerate some of them on the straight. The piston/sleeve/conrod almost like new after 2 gallons.
The set worked really well with a new exhaust system we are testing. Edward have a sample with him so he can give you guys more feedback after.
Got to go, back to work. More update later.
Tried really hard but only managed to qualify B 1st ( finished 9th) and one other team mate qualified B 6th.( he finished 5th in B)
I was running 4th since I started with too big tires. I was catching 3rd guy toward 15 mnins (and less then 2 sec behind) before I had some pit lane issue so could not finish the race. End up 9th in the B.
I guess better luck next time
Overall, the BRB piston and sleeve was perfect. I had among the fastest engines, competing with other NovaMax 15's, and out accelerate some of them on the straight. The piston/sleeve/conrod almost like new after 2 gallons.
The set worked really well with a new exhaust system we are testing. Edward have a sample with him so he can give you guys more feedback after.
Got to go, back to work. More update later.
#1220
Originally posted by Surge
Sorry about the bad luck Kitracer, but it sounds like a good result anyway. If you were running with 15's, you have a FAST engine. I can't wait to try mine at the Winternats. I hope we do as well.
Sorry about the bad luck Kitracer, but it sounds like a good result anyway. If you were running with 15's, you have a FAST engine. I can't wait to try mine at the Winternats. I hope we do as well.
I knew it was important but after this race, the clutch setting and the Pipe just blew me away.
I explained to Ed on the phone already last night so try it out guys.
Good luck on Winternats.
#1222
Originally posted by Pit-racer
Kit , and what engine were you using the BRB set in?
Kit , and what engine were you using the BRB set in?
Is the exhaust, not the crankcase. Just check the bearing/ crankshaft/ crankpin in good condition.
hope Edward have time to try the prototype exhaust asap.
#1225
Originally posted by xtreme888
Hi Ed,
What this new exhaust are talking about ?
Any further info ?
philip
Hi Ed,
What this new exhaust are talking about ?
Any further info ?
philip



1Likes