Hi Chris
You got PM

Thanks guys! I will check tonight and see when I can put together an order.

hi,
i have make a new left engine mount,
the the holes in the engine not the same as novarossi . i have grind the chassi, the ps engine is bigger at the bottom, i whant to have a little space under the bottom of the engine
dieter

hey could you translate what you wrote under the picture? thanks Peter Team Palmaris

here it is

"A good sword without a good fechter is only Polish iron. But with a KO are you halfway there"

I hope i'm correct "D"

Peter, is that you in the pic?

Marcos is right but I still use a Futaba gun.

CONGRATS to Todd Bath for his 2nd place win!!!


Way To GO TEAM PALMARIS!!

What happened to the Gianni Giorgio? Disqualified?

1 8 118 30:13.92 GIANNI GIORGIO 157 28.16
2 3 116 30:09.32 OMAR MCFARLANE 113 27.76
3 7 114 30:06.69 TODD BATH 48 27.32
4 5 108 30:17.49 ANDREW MOWERY 56 25.73

Anyway, congrats.

he might of bumped up to the next main

here it is "D"

-- .12 SEDAN 1/10 - D Main --
Pos Car Laps time name id avg.mph
1 8 118 30:13.92 GIANNI GIORGIO 157 28.16
2 3 116 30:09.32 OMAR MCFARLANE 113 27.76
3 7 114 30:06.69 TODD BATH 48 27.32
4 5 108 30:17.49 ANDREW MOWERY 56 25.73
5 6 103 30:01.58 CHARLES BONE 131 24.75
6 0 98 28:03.32 RHYS ROBINSON 185 25.21
7 4 97 30:16.53 RENE JAVOIS 175 23.12
8 1 87 27:15.18 RICHARD RIVERA 25 23.04
9 9 19 4:36.93 FREDRIK MOLZER 55 29.70
-- 2 --- DNS --- BEN PUTERBAUGH 123

-- .12 SEDAN 1/10 - C Main --
Pos Car Laps time name id avg.mph
1 9 140 35:02.23 RAFAE ANGULO 42 28.83
2 1 138 35:04.62 KEVIN McGILL 45 28.39
3 2 136 35:06.22 HARRY HANANOUCHI 92 27.96
4 0 122 35:13.85 GIANNI GIORGIO 187 24.99
5 5 115 32:54.96 LARRY PRYOR 76 25.21
6 3 108 30:37.45 TOMMY PORFIRIO 120 25.45
7 6 104 26:43.76 JIM SOWA 4 28.08
8 7 66 17:11.87 RON ARAGUNDE 108 27.69
9 4 57 14:58.82 PETER BRETON 46 27.46
10 8 30 10:58.83 JOHN WONG 52 19.71

Yeah I know he got bumped up to C main... But I would think that does prevent him from being at the podium for the D main champ, no?

yes it does

Palmaris BRB sets provided plenty of power for us ....... traction was the only item which prevented us from making the higher mains. Thanks Eguard and "CEO Leo"

I just wanted to thank Edward and Leo for continueing to make some great p/s sets. We definently had the power which is evident in most of the lap times. We and all that attended just had a hard time keeping all four wheels down on the track. if you were there then you know what we had to deal with and for some of you that weren't on my mtx3, I was running gray springs, 3.5 toe in rear 4degree camber rear 3.5 mm ride hieght, and 57mm 42 shore twister tyres and still could roll it over if you weren't careful. and also we cut the front tires to 21mm width.

we had a great time and many thanks again to Edward and Leo.

hey Richard (Pit-Racer) it was great to meet you and will definently try to come and race with you and Todd.

Go Team Palmaris talk later Peter B.