Community
Wiki Posts
Search

3mp-x or 3pl?

Thread Tools
 
Search this Thread
 
Old 02-22-2014 | 06:59 AM
  #1  
thephunnel's Avatar
Thread Starter
Tech Adept
iTrader: (1)
 
Joined: Oct 2013
Posts: 168
From: Barrie ON CAN
Default 3mp-x or 3pl?

I've been thinking of switching over to Futaba and trying to decide if I need the Fasst technology. Eventually I want to have 2 radios so the fhss stuff seems to be more economical, but if the fasst is that much better, then that's what I'll go with. I asked the lhs what the difference was and all he said was fasst is faster. I asked if he thought I needed fasst and he said it depends on how serious I am. I do race, but its not as if I plan to go pro. Anyone have input on these choices?
thephunnel is offline  
Old 02-22-2014 | 06:25 PM
  #2  
MarkA's Avatar
Tech Champion
iTrader: (21)
 
Joined: Aug 2001
Posts: 9,161
From: Corvallis, OR
Default

Originally Posted by thephunnel
I've been thinking of switching over to Futaba and trying to decide if I need the Fasst technology. Eventually I want to have 2 radios so the fhss stuff seems to be more economical, but if the fasst is that much better, then that's what I'll go with. I asked the lhs what the difference was and all he said was fasst is faster. I asked if he thought I needed fasst and he said it depends on how serious I am. I do race, but its not as if I plan to go pro. Anyone have input on these choices?
Futaba's FASST stuff is indeed very fast but their "regular" speed stuff is also faster than most people's perception is anyway. I would not recommend the 3PMX because the extra receivers are very expensive ($80ish instead of $35-40 for the other ones). In other words, unless there is a reason for you to look at going all the way to 4PLS, it sounds like your decision has been made.
MarkA is offline  
Old 02-22-2014 | 08:58 PM
  #3  
ironzgti35's Avatar
Tech Master
iTrader: (33)
 
Joined: Apr 2011
Posts: 1,153
From: Yardley, PA
Default

I've had both and prefer the 3pl hands down. It takes 4 batts instead of 8, and the rx's are half the price. I personally couldn't really tell the difference in speed between the 2. Plus, all the 3pl rx's work on the 4pl (current radio)
ironzgti35 is offline  
Old 02-23-2014 | 04:37 AM
  #4  
thephunnel's Avatar
Thread Starter
Tech Adept
iTrader: (1)
 
Joined: Oct 2013
Posts: 168
From: Barrie ON CAN
Default

Thanks guys. Some good info there. I just worry that I'll put my money into fhss and then turn around in the future only to dump it in favor of the fasst, but it sounds like the fhss will do the job. I wonder how comparable the fhss is to my spektrum?
thephunnel is offline  
Old 02-23-2014 | 11:07 AM
  #5  
Tech Regular
iTrader: (5)
 
Joined: May 2012
Posts: 318
Default

Trigger is way to big on the 3pm. Makes quick braking difficult because of the gap between the foward and brake/reverse
Unless u have real fat fingers I wouldn't suggest it
Voltron989 is offline  
Old 02-23-2014 | 11:34 AM
  #6  
MarkA's Avatar
Tech Champion
iTrader: (21)
 
Joined: Aug 2001
Posts: 9,161
From: Corvallis, OR
Default

Originally Posted by Voltron989
Trigger is way to big on the 3pm. Makes quick braking difficult because of the gap between the foward and brake/reverse
Unless u have real fat fingers I wouldn't suggest it
Many people wrap tape around the brake side of the trigger on many controllers regardless of brand to "adjust" that anyway.
MarkA is offline  
Old 02-23-2014 | 02:58 PM
  #7  
Tech Regular
iTrader: (5)
 
Joined: May 2012
Posts: 318
Default

Originally Posted by MarkA
Many people wrap tape around the brake side of the trigger on many controllers regardless of brand to "adjust" that anyway.
Not sure if you ever used a 3pm but the size of the trigger is extremely big. I've never seen a remote with such a large trigger.
I can see people wrapping triggers on any TX to get them just right but to wrap enough tape to close the gap on a 3pm would start to restrict the foward brake travell on the trigger.

The 3pm was my first remote. My friend has a 3pm but he is 6'6 350lbs and it's still big for his finger lol I have no idea why futaba made the trigger so big on the 3pm. My 4pksr is normal size. Maybe the 3pm was purposely made for large fingers? Lol

To the original poster just find a used 4PL (or pony up for a new 4pls) and don't worry about the Fasst system. The FHSS is just fine you won't miss/notice any differnce and you'll save money on RXs.
Voltron989 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.