Community
Wiki Posts
Search
Like Tree6Likes

Team Orion Engines

Thread Tools
 
Search this Thread
 
Old 08-12-2013 | 08:06 PM
  #1756  
Tech Adept
 
Joined: Feb 2011
Posts: 199
Default

They are all the same,EFRA 2058 made by LM.
kyosho28 is offline  
Old 08-12-2013 | 08:08 PM
  #1757  
toyoter91's Avatar
Tech Master
iTrader: (47)
 
Joined: May 2011
Posts: 1,351
Default

Originally Posted by wildwillydriver
Just a quick question for experts, i'd like to buy a 2058 pipe for my Orion engine (i'm now running the 2013). I saw different brands that sell 2058 are they similar or is better to buy the Orion one?
Generally the different brands are cheaper.
Thanks for your time and help.
Bye.
WWD
Yup, same pipe
toyoter91 is offline  
Old 08-13-2013 | 05:20 AM
  #1758  
Tech Regular
iTrader: (47)
 
Joined: Dec 2009
Posts: 304
Unhappy

What is the factory carb setting for a crf 5 port
klujan1001 is offline  
Old 08-13-2013 | 06:44 AM
  #1759  
wildwillydriver's Avatar
Tech Adept
iTrader: (1)
 
Joined: Feb 2009
Posts: 154
Default

Originally Posted by kyosho28
They are all the same,EFRA 2058 made by LM.
Thanks, this is a very good info, so any Nvision, Werks, is the same as the Orion one for half the price.
WWD
wildwillydriver is offline  
Old 08-13-2013 | 06:59 PM
  #1760  
toyoter91's Avatar
Tech Master
iTrader: (47)
 
Joined: May 2011
Posts: 1,351
Default

Originally Posted by klujan1001
What is the factory carb setting for a crf 5 port
If i reset my needles I always go back to flush and flush as its extremely close to the stock settings.
toyoter91 is offline  
Old 08-28-2013 | 09:29 AM
  #1761  
nickdawg18's Avatar
Tech Master
iTrader: (33)
 
Joined: Jul 2010
Posts: 1,696
From: Granite City, IL
Default

What do you guys think about the new RS version due to come out?
nickdawg18 is offline  
Old 10-23-2013 | 07:08 PM
  #1762  
cjwilly's Avatar
Tech Apprentice
 
Joined: Jun 2008
Posts: 78
From: SE Iowa
Default

Here's my story.. bought one of the deeply discounted discovery 5 port combos, took my time to break it in correctly, raced it, loved it.. till the tune started to go crazy all over the place. After some investigating, it seems the flywheel got into the front bearing, tore up the seal and let a bunch of air in. Unfortunately, dirt too... bearings are junk now. Here's the best part, in the noob move of the year, when I reassembled it to pack it away (at the track) I let the backplate get into the piston skirt! Now I can't find a piston and sleeve anywhere! I was loving this engine, just barely had a gallon on it! Does anyone have any leads on where to get a set or any others that will work?
cjwilly is offline  
Old 11-26-2013 | 03:43 AM
  #1763  
Qan's Avatar
Qan
Tech Initiate
 
Joined: Jul 2013
Posts: 27
Default

What clutch & spring rate u guys running on crf 5 port in order to get a good bottom and moderate top speed? Tq & apreciate for any inputs.
Qan is offline  
Old 02-03-2014 | 01:30 PM
  #1764  
305M3's Avatar
Tech Master
iTrader: (44)
 
Joined: Dec 2008
Posts: 1,244
From: Colorado Springs
Default

When will the .22 Truggy engine and the CRF RS's be available?

Hard to believe there has been no action in this thread since late-November...
305M3 is offline  
Old 02-06-2014 | 02:40 PM
  #1765  
RevoRacer50's Avatar
R/C Tech Elite Member
iTrader: (41)
 
Joined: Jan 2011
Posts: 507
From: Oldfort TN
Default

That's what I am wondering. I am really looking forward to these new engines.
RevoRacer50 is offline  
Old 02-07-2014 | 08:17 AM
  #1766  
emacrimes's Avatar
Tech Regular
iTrader: (2)
 
Joined: Jul 2012
Posts: 251
From: Costa Rica
Default

Sorry for the dumb question, can the CRF 3Port work with P3 plugs?
emacrimes is offline  
Old 02-07-2014 | 12:56 PM
  #1767  
Tech Addict
iTrader: (3)
 
Joined: Jan 2007
Posts: 535
Default

yes, that's usually what I use in mine.
RePeTe is offline  
Old 02-07-2014 | 02:45 PM
  #1768  
emacrimes's Avatar
Tech Regular
iTrader: (2)
 
Joined: Jul 2012
Posts: 251
From: Costa Rica
Default

Originally Posted by RePeTe
yes, that's usually what I use in mine.
Ok, thank you!
emacrimes is offline  
Old 02-21-2014 | 09:04 AM
  #1769  
easy e's Avatar
Tech Master
iTrader: (29)
 
Joined: Sep 2001
Posts: 1,153
From: Shreveport, LA
Default

I see lots of mixed suggestions for the pipe on the FT321; 2013 or 2058

Whats your latest opinion?
What are the performance differences between the 2013 and 2058 ie. is one top end or mid range , low end .. smoother or more torque ?? Thanks for the feedback
easy e is offline  
Old 02-22-2014 | 10:32 AM
  #1770  
luke71933's Avatar
Tech Adept
 
Joined: Feb 2012
Posts: 185
Default

Hi guys,
Which engine do you recommend from these preferable with the one with the maximum lifespans and great all round.
1.)Team Orion .21 CRF REV offroad engine ORI80607
2.)Team Orion CRF Alpha 21 3P 2012 Off/Road Competition
3.)TEAM ORION CRF B321 Factory Team Buggy
ORI80691
4.)REDS R5T 21 Buggy 5 ports + boosters REDS R5T Team Edition
R5T
5.)TEAM ORION Alpha Discovery 3 Port
ORI80657
6.)Picco Picco Boost .21 Turbo Buggy Engine with Pipe & Manifold
P4-4010
7.)Bullitt B217 racing engine

Thankyou
luke71933 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.