throw that busted DEX408T to the side and get a Tekno.

I'm on board unless I find a real TD deal which just might happen.

I'm really happy they come with 8x1.3 pistons as a standard part.

Can't wait to start my build.

Mines together just a few minor details and a wheel alignment and it's ready for the track. I did find one problem, this rig is designed for low kv motors, high kv won't work. I wanted to run one of the old Castle 1600 or 1800kv motors but there isn't enough room. So while I'm deciding on which way to go I put a Castle 2200 in just to get it rolling. The smallest pinion I can use is 14t without grinding on a brand new motor mount and that's not going to happen. If my calculations are close a 14t pinion will be about 45 mph with a 4s battery. That's a recipe for high temps. Looks like I'll end up using my Tekin 2000kv truggy motor. I wanted to go old school but I bought a truggy from a bunch of modern designers! LOL By the way Tekno, your kits are awesome. So fun to put together a kit without needing modifying skills.

He's my thoughts on your next kit, take an eb48 and shrink it to 1/10 scale. I would buy a 4wd 1/10 buggy in a heartbeat and I'll bet I'm not the only one. Little bird told me the next Tekno kit will be a 2wd sct, boo hiss!!!

Anyone that ordered from tower get a shipping confirmation yet?

Mine shipped from Tower Hobbies on Friday and I did get a confirmation.

No and I've been refreshing the damn thing all weekend. They should have known to not take any time off until mine shipped... I mean WTF

Well...Tower can take all the time they need for me lol.

I still need to purchase a S9352 servo and RX8 Gen2 with the 2050 motor.

Thanks for all the feed back from all who have driven their ET48 so far. Still waiting for mine to get here. All the info is great.

I have not seen a confirmation on my order yet, but I noticed again this morning they show Limit Quantity AGAIN..a holes... Send Me My Toys!!!!!!!!!!

Hey Dan, you need to make your way to San Antonio, we have great track,60 or more entries each Sat, and Wed's nights 30+...come on down!!

There are a couple of us up here that are wanting to do a state tour starting this year hitting a few different tracks a year.

What track do you guys race at? I use to live in Austin and travel back through a couple of times a year. I quit the hobby before I moved out to Texas and never found out how big off road rc racing was there until after I left. Saw a nice track in Katy Texas back in August.

The track is RCHQ, it's just couple of miles off 35 at Judson Rd. When you get back down this way, drop on by, it usually starts as raceing and turns into a party by the end of the day...lol

Ran my et48 again last night did a few more changes and it was ridiculously fast had to run with ebuggies last night on a indoor track and this thing turned tighter and held a line better than any buggy out there and was a full lap or more ahead of all the buggies by the end