I've run plenty of mod setups in blinky, almost all of them have worked well.

That's a nice looking ride! If I may make a suggestion, I would take out the servo spacers so that the steering link had a more "in line" action.

Thanks man, yeah I thought about that, however, I did it that way coz I Wanted everything to be aligned with the receiver and the esc.. Wanted everything as close as possible to the middle. I really appreciate the suggestion though. Thank you

apologies rick and the others,its just that at my local track the top guys in blinky are using 500/550 cst,cant see that in a mod set up,hence my comment,so far ive got his on 3 hole pistons 450cst with specr 2.7 springs(i havnt got any thicker oil yet)but its still 1.5 secs a lap down,can you post a set up or link to the one you thing would be suitable? i run an xray t4 which is a lot softer,so i struggle with setting up my sons car,he is 12 so feedback from him isnt much

Any set up sheet of AE racer used in Reedy race 2013 ?

I will post my setup sheet shortly as well as that of 13.5 TC winner Gonzalo Cortes.

Rick Hohwart - 2013 Reedy TC Race of Champions - TC6.1 WC

cheers rick

Bob Stellflue - 2013 Reedy TC Race of Champions - TC6.1 WC 13.5

is this set up ok for a tc6,apart from the camber links the rest will work?

Yes it will work well with the TC6.

I have done something similar, but for the raceday I have to put 180 (!) gr. of weight in my car

I hope that ESC power cap is firmly mounted to the chassis while you're driving and not just hanging off the side

I noticed that too. And servo wires as well