Team Associated TC6 Thread
#9226
Tech Master
iTrader: (15)
RSD6.2/ TC6 roller
If anyone is interested, I have my chassis up for grabs.
http://www.rctech.net/forum/r-c-item...c6-roller.html
http://www.rctech.net/forum/r-c-item...c6-roller.html
#9227
#9229
has anyone got access to a good set up for med traction tarmac 17.5 blinky ?
im trying to set my sons car up as its about 1 sec a lap down,thanks in advance
im trying to set my sons car up as its about 1 sec a lap down,thanks in advance
#9230
Tech Regular
iTrader: (16)
hey all...we were talking at the shop the other day talking about the effect of thicker diff oil/putty in a front gear diff. We tried to walk through the effects...the best we came up with was improved on power steering but that seems counter intuitive. I do run the front gear diff in a 6.1, tried the cleaning putty and ,total guess here, feels like 10K max. It seems to have work in a bunch and is less effective at locking now. I just popped for some of the 1 million silicon oil and 2.5 mil silicon putty from Gravity RC. I do like how the car drives now great turn in but it does seem like on power is a little pushy. I'm hoping the thicker front diff will keep the lines tighter on power. What do you think?
#9231
got bored today and cleaned up my already clean set up...
Shrink wrapped all solder spots(motor/lipo bullets), shrink wrapped all all wires. shrink wrap clear the lipo Battery, rewired the motor., finished the LRP Radical Fan kit. Installed Tamiya Body Post Adjuster
here is my masterpiece TC6.1 Worlds Car
Thanks for looking
Shrink wrapped all solder spots(motor/lipo bullets), shrink wrapped all all wires. shrink wrap clear the lipo Battery, rewired the motor., finished the LRP Radical Fan kit. Installed Tamiya Body Post Adjuster
here is my masterpiece TC6.1 Worlds Car
Thanks for looking
#9232
Tech Master
iTrader: (27)
got bored today and cleaned up my already clean set up...
Shrink wrapped all solder spots(motor/lipo bullets), shrink wrapped all all wires. shrink wrap clear the lipo Battery, rewired the motor., finished the LRP Radical Fan kit. Installed Tamiya Body Post Adjuster
here is my masterpiece TC6.1 Worlds Car
Thanks for looking
Shrink wrapped all solder spots(motor/lipo bullets), shrink wrapped all all wires. shrink wrap clear the lipo Battery, rewired the motor., finished the LRP Radical Fan kit. Installed Tamiya Body Post Adjuster
here is my masterpiece TC6.1 Worlds Car
Thanks for looking
Very clean. How do you get the receiver wires so short?
#9233
You can buy a new harness online to cut and splice
#9234
#9236
Tech Regular
iTrader: (16)
I use this on outdoor asphalt, works pretty good. Rick H. has also suggested the same set up with 1b all the way around in back. I would imagine that would be used for a higher grip tracks than this set up, please correct me if that is in error.
http://www.teamassociated.com/pdf/ca...ya_11-2012.pdf
http://www.teamassociated.com/pdf/ca...ya_11-2012.pdf
#9237
I use this on outdoor asphalt, works pretty good. Rick H. has also suggested the same set up with 1b all the way around in back. I would imagine that would be used for a higher grip tracks than this set up, please correct me if that is in error.
http://www.teamassociated.com/pdf/ca...ya_11-2012.pdf
http://www.teamassociated.com/pdf/ca...ya_11-2012.pdf
#9238
i cant find that set up i have jeff cuffs as thats the only 17.5 that i can find,the track kinda demands a stiff set up to carry corner speed
#9240