Community
Wiki Posts
Search
Like Tree13Likes

Murnan Modified Motors

Thread Tools
 
Search this Thread
 
Old 04-23-2013 | 07:24 AM
  #3331  
Tech Rookie
iTrader: (1)
 
Joined: Apr 2011
Posts: 18
From: anywhere rc
Default

Originally Posted by Grinder
If the engine has only been broken in its fine. How much fuel has been run through the engine? Which engine is it? You can send the engine in, then I can let you know for sure.
It has about 3/4 of a gallon through it and its a Picco EDX
whocares is offline  
Old 04-23-2013 | 02:49 PM
  #3332  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by whocares
It has about 3/4 of a gallon through it and its a Picco EDX
That should be ok. Send it over, and I'll let you know if it needs anything.
Grinder is offline  
Old 05-05-2013 | 03:18 PM
  #3333  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default First round of the Irish National On-Road I.C Championship.

Chris Steel wins the first round of the Irish National On-Road I.C Championship.

Sunday saw the first round of the Irish National On-Road I.C Championship. A good turn out was present on the day.

We had four classes 200mm I.C, 1/8th I.C, 200mm RTR I.C and 190mm Electric.

200mm I.C:
Shepherd driver Chris Steele using MM novarossi flash was the man to beat setting the pace for the day with T.Q. of the day. Hot on his heels were Shepherd driver Darren Gibb using MM RBM3, Anthony Fitzpatrick, Colm Gaffney, Jacek Zadrozny and Stephen O'Connor which were close on pace all day. A 30min Final was held with a great start from pole sitter Chris. Darren was hot on his heels for most of the final but could not catch the leader. Anthony, Colm and Jacek were in a close battle at the start until Jacek flamed out with engine trouble. This separated the field alot more and there were consistent positions held until Colm ran into trouble and did not return to track. This brought Stephen up to fourth place which he sealed by crossing the finish line. Great racing and clean racing by all. Leader took the win with an impressive 4 laps up on second place Darren.
Attached Thumbnails Murnan Modified Motors-image.jpg  
Grinder is offline  
Old 05-06-2013 | 09:44 AM
  #3334  
JamesHealey's Avatar
Tech Addict
iTrader: (1)
 
Joined: Jul 2011
Posts: 556
From: United Kingdom
Default

2013 Murnan Modified M21 On Road Engine

Anyone tried this engine out? If so what's it like compared to the normal stuff that comes out from picco?

Cheers
Jim
JamesHealey is offline  
Old 05-11-2013 | 07:05 PM
  #3335  
Tech Apprentice
 
Joined: Dec 2012
Posts: 54
From: HKG
Default

Is the Murnan Modified NR VIRTUS engine faster than Original? I see the Murnan Virtus is more expensive than the Virtus break in. I
victor1997621 is offline  
Old 05-12-2013 | 05:02 AM
  #3336  
NITTO550's Avatar
Tech Regular
 
Joined: Apr 2010
Posts: 438
From: Philadelphia P.A.
Default

I have a question guys, can I use the piston and sleeve set from a flash pt in a flash 3 tuned. Will it work even though the cranks are not the same?
NITTO550 is offline  
Old 05-12-2013 | 08:27 AM
  #3337  
choisan's Avatar
Tech Elite
iTrader: (13)
 
Joined: Jul 2004
Posts: 2,284
From: Bay Area
Default

how is the m21 2013 compared with the latest .21 EDOMOD X-TYPE
choisan is online now  
Old 05-12-2013 | 08:34 AM
  #3338  
Tech Master
 
Joined: Apr 2010
Posts: 1,098
Default

Originally Posted by victor1997621
Is the Murnan Modified NR VIRTUS engine faster than Original? I see the Murnan Virtus is more expensive than the Virtus break in. I
sure faster
kyosho malaysia is offline  
Old 05-12-2013 | 10:46 AM
  #3339  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by JamesHealey
2013 Murnan Modified M21 On Road Engine

Anyone tried this engine out? If so what's it like compared to the normal stuff that comes out from picco?

Cheers
Jim
My M21 has more power than the stock Picco engine. The M21 powerband is more aggressive than the stock engine, with more rpm.
Grinder is offline  
Old 05-12-2013 | 10:51 AM
  #3340  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by victor1997621
Is the Murnan Modified NR VIRTUS engine faster than Original? I see the Murnan Virtus is more expensive than the Virtus break in. I
My modified Virtus is a very powerful engine. It is faster than the stock engine. More power, and rpm over stock. It's a very nice engine, with a very linear powerband.

The Virtus pre run is a stock engine with novarossi breakin done, not one of my modified engines.
Grinder is offline  
Old 05-12-2013 | 10:52 AM
  #3341  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by NITTO550
I have a question guys, can I use the piston and sleeve set from a flash pt in a flash 3 tuned. Will it work even though the cranks are not the same?
Yes, it will work.
Grinder is offline  
Old 05-12-2013 | 10:57 AM
  #3342  
Grinder's Avatar
Thread Starter
Tech Master
iTrader: (2)
 
Joined: Feb 2003
Posts: 1,864
Default

Originally Posted by choisan
how is the m21 2013 compared with the latest .21 EDOMOD X-TYPE
The M21 has the same basic parts. The M21 has different crank timing, port timing, and combustion chamber shape than the EDO.

The M21 has a more aggressive powerband, more rpm, and power.
Grinder is offline  
Old 05-12-2013 | 05:59 PM
  #3343  
choisan's Avatar
Tech Elite
iTrader: (13)
 
Joined: Jul 2004
Posts: 2,284
From: Bay Area
Default

Thanks for clarification. How is it compared to the reds 2013 wc?
choisan is online now  
Old 05-12-2013 | 08:17 PM
  #3344  
NITTO550's Avatar
Tech Regular
 
Joined: Apr 2010
Posts: 438
From: Philadelphia P.A.
Default

Thanks for the quick response!
NITTO550 is offline  
Old 05-13-2013 | 06:24 AM
  #3345  
Tech Apprentice
 
Joined: Dec 2012
Posts: 54
From: HKG
Default

Thank you. Is the engine very thirsty?
victor1997621 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.