I have plenty. I'll send you a count and a quote this evening.

Well Cain, I just picked up a buggy that came with Pin fronts. All new or like 1 practice run. Most all brand new on JC yellow wheels. There is also a set of brand new JC rear pin wheels and a setup of rear bro codes on yellow wheels. I might not know the exact compound of the tires, the previous owner did mark some of the wheels inside the rim. I know for sure there were some 4 ribs for the front, JC front bar codes, and some others. I am at work and dont have the list if front of me. There was a pair of rips and suburbs for the front, but I might keep those. Unsure atm because I might be selling my personal b4. I probably wont get what I want for it though, lol and will keep it. But I do have some stuff i am clearing out. I have a set of unmounted Bk bar reds and I think a set of pinned tapper pins in pink. I need to double check on those. I can take picks tonight if you are interested.

Looking for help on fitment sizing.

I have an RC10T4.1 which just broke the ball and cup for the rear. When this happened I lost the dogbone due to how much crap was on the ground and unable to locate it.

I am going to buy and replace, but I was wondering if anyone knew if the fitment would work for what I'm looking into.

Here are the specs I found on the stock driveshaft/dogbone


I am looking at one of these. Not sure on the Diameter though. Cant find it.

HSP RC Car Part Front/Rear Dogbone 89.5mm
Item No: 08029


Anyone able to help on the fitment?

here you go.
http://www.amainhobbies.com/product_...iated-Dog-Bone

I will probably purchase those. Reason I ask, the HSP are only about $4 for 2 of the, which I'd probably buy about 3-4 packs of them so I don't have problems running if the ball and cup break again.

The link you sent doesn't show if its 1 or 2 that you get in the package, but the image I see shows 2 in one package.

edit: Thank you very much for the help!

I am sure it is a pair. I would just get the AE OEm ones, as you know they will fit. Not worth saving $2 to only find out others dont work.

thanks. feel free to send me pm's with the wheel and tire info.

will do, some of the tires have AKA red inserts also. So I will try to take a good list tonight for you.

thanks guys!

if you put a small spur and pinion on the b4.1 and move the motor forward 2 or 3 mm
will that make the buggy handle better on the track?? or just what will that do for it.

Uploaded with ImageShack.us


ok, here we go. most tires look brand new and the rest are 95% tread.

1-Bro Code Rears with Proline inserts ( these are the only rears)
1-unmarked ribs with black inserts
1-JC grooveys with aka red insert
1-Proline hole shots with aka red insert
1- Barcode with stock insert
2- Barcode with AkA red inserts
1- AKA Vector with Proline Blue Inserts
1- New AE pin yellow rear wheels
1- Unmounted Losi Rear red tapper pin
1- unmount front 4wd front red taper pin
1- trinity blue rear foams
1- NIP bk bar rear red
1- unmounted mystery proline tire. looks like a small pinned hole shot

Were the best place to put a shorty pack on the b4 1 running stock 17.5 think I might try one out and lose some weight?

Anyone know anything about tank power Lipo packs are they any good? I found a 80c pack for 69 bucks

What is a strc u brace?

I mount mine a little bit back from middle, i would say to start middle and then move it back and forth to see how you like it.
Never heard of them. I have had very good luck with the Protek packs from AMain hobbies. Pro-Match has a great reputation, others have had good luck with the SMC stuff. Did you mean Trak Power? Haven't heard anything regarding them either.
This:
http://www.amainhobbies.com/product_...race-Gun-Metal
Would stick with the standard plastic. I have never used anything from them but have heard that the aluminum isnt of the highest quality.