get a hitec 7955tg servo and a ofna 24t horn (like on the first page)......and never look back. i run on my eb48 and sct410.....NO PROBLEMS at ALL!!!! i highly reccomend putting washers under link on bellcrank to assure a level link, this will put less stress on servo and increase longevity!! ..........p.s. if you look, this is what most tekno drivers are running as well, maybe a diff horn but pretty much the same. i'd stay away from the hb horn due to increase stress on servo, i snapped inside middle plastic piece (on 1/8 scale) in servo were output shaft comes thru. replaced middle plastic plate and horn to ofna, and been fine since, and thats an 1/8 scale, so you know that servo can take the abuse. NEVER stripped anything

i run mine LOCKED with that 7955tg servo and ofna horn and no stripped problems

Can't find the stock servo arms the manual does not have a part#. I want to order a spare.
Thanks

Yeah thats what im saying. Probably why you killed the plastic one.

I have to buy a new servo now. Thinking about the protek 130 but may have to hunt down a used hitec. Never had one fail

nope.......killed the plastic one on my 1/8 scale in 5 min first run with saver at stock position. hit a tube and SNAP!!! trust me im not the only one who has broke the plastic with in min........id say atleast 90% of us didnt bother to put on plastic horn, and 100% of us that had the eb48 prior to the sct410 went straight to the aluminum horn before it touched the track........i have a STRONG feeling you will report back with the plastic one broke......suck for you if it happened in a main.....

look at danny, matthew armeni and pres and other team drivers, almost all are using same servo and horn......they've been running this car for a long time and know what works. NONE are running the plastic one

I have an aluminum horn..

I'm using a Protek 250S (helicopter tail servo) in my SCT410 (.04s/in and 103 oz/in)

It has no business in a heavy SC truck but surprisingly it's been holding up great!

I have the 250T to put in (.07s/in and 370oz/in) later, but I don't think I really need to

Calm down.

O....haha right on

haha im calm, reading words can be interpreted in a misleading manner. sorry it came off like that. was just trying to help and give an opinion

lol the hitec servos yall get on the west coast mu be better than the ones on the east coast. they come back 10 to 1 over any other servo with stripped gears,

interesting.....do you find this with the new ones or old? i know they had a bad rap few years ago, i havent had any problems nor does anyone i know. but have heard bad things in their past

I'm running the serpent arm with a spektrum h6040 seems to be getting the job done.