Team Associated B4.2 Thread
#226
Well I bought two B4.1 Worlds cars in the last month, both of which came with the T4.1 battery straps and .5 degree hubs instead of the 0 degree hubs. Let's hope AE packs the B4.2 with the right stuff.
#231
#233
#234
Joined: Nov 2003
Posts: 3,595
From: Covington, La.
Go back and look at the b4 platform worlds wins. Then come back and tell me how many of them were repeat drivers.
#235
On/Off Switch: unique design, please read! The switch operates as „active low“, this means if you cut-off the
switch the speed-control will always be turned on and not off! The reason is, that in case the switch gets damaged
in a crash and fails, you‘ll still be able to complete your run with no switch!
In case you‘d prefer running without the On/Off switch and want the speed-control to be turned on instantly once
you connect it to a battery, you must remove the switch and not connect the two wires which go to the switch!
Sooo...either fix it or leave the two wires un-connected
#236
Dustin Richards, Mike Truhe and Jared Tebo have pulled down their fair share of wins in the past several years, among others, but you're right about Cav, he won a lot when he raced for Losi.
#237
#239
From the manual:
On/Off Switch: unique design, please read! The switch operates as „active low“, this means if you cut-off the
switch the speed-control will always be turned on and not off! The reason is, that in case the switch gets damaged
in a crash and fails, you‘ll still be able to complete your run with no switch!
In case you‘d prefer running without the On/Off switch and want the speed-control to be turned on instantly once
you connect it to a battery, you must remove the switch and not connect the two wires which go to the switch!
Sooo...either fix it or leave the two wires un-connected
On/Off Switch: unique design, please read! The switch operates as „active low“, this means if you cut-off the
switch the speed-control will always be turned on and not off! The reason is, that in case the switch gets damaged
in a crash and fails, you‘ll still be able to complete your run with no switch!
In case you‘d prefer running without the On/Off switch and want the speed-control to be turned on instantly once
you connect it to a battery, you must remove the switch and not connect the two wires which go to the switch!
Sooo...either fix it or leave the two wires un-connected
#240
Joined: Nov 2003
Posts: 3,595
From: Covington, La.
B4 has captured them all since its release and all with different drivers.
2003 – Billy Easton (Associated RC10B4) – Largo, USA2005 – Neil Cragg (Associated RC10B4) – Collegno, Italy2007 – Hayato Matsuzaki (Associated RC10B4) – Ishikawa, Japan2009 – Martin Achter (Associated RC10B4) – Pretoria, South Africa**2011 – Ryan Cavalieri (Associated RC10B4.1) – Vaasa, Finland
2003 – Billy Easton (Associated RC10B4) – Largo, USA2005 – Neil Cragg (Associated RC10B4) – Collegno, Italy2007 – Hayato Matsuzaki (Associated RC10B4) – Ishikawa, Japan2009 – Martin Achter (Associated RC10B4) – Pretoria, South Africa**2011 – Ryan Cavalieri (Associated RC10B4.1) – Vaasa, Finland



4Likes
