The AE FActory Team B44.2 Thread

Reply Subscribe

Thread Tools

Search this Thread

01-03-2013 | 08:12 AM

#1591

ryanpatrickgore

Tech Elite

iTrader: (14)

Joined: May 2011

Posts: 2,025

From: TRCR

Quote:

Originally Posted by memyselfandI

I am looking for help here guys, have just finished building my b44.2 and the rear transmission is binding when I turn the wheels on power, the entire rear suspension moves up and down from full droop to about 3/4 droop, I have obviously done something wrong, any ideas

It's the cva. The pin is throught the large hole rather than the small pin hole. Take it apart and rebuild it. This happened to me.

01-03-2013 | 08:44 AM

#1592

ryanpatrickgore

Tech Elite

iTrader: (14)

Joined: May 2011

Posts: 2,025

From: TRCR

Quote:

Originally Posted by CaseyDDR

Thanks, I have no issues with the current setup honestly, so I won't bother with that.

What about the shock springs? Good combination you might suggest? I'll be running 35wt in the front 30wt in the rear to try first. I know the big bores from what I've read everywhere are a huge improvement.

Run the standard kit setup. The kit is dialed out of the box, maybe drop down a spring in the rear and a step in oil if needed but that's it

01-03-2013 | 08:55 AM

#1593

Racer X8000

Tech Regular

iTrader: (2)

Joined: Jul 2011

Posts: 372

Quote:

Originally Posted by ryanpatrickgore

Run the standard kit setup. The kit is dialed out of the box, maybe drop down a spring in the rear and a step in oil if needed but that's it

+1 I'm running mine with the kit setup except I changed the front oil to 37.5 and the rear to 32.5 ( as per this setup sheet ) It's totally dialed on an indoor clay track (med to high traction).

01-03-2013 | 08:58 AM

#1594

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Quote:

Originally Posted by Matt Trimmings

I belive you are looking for this thread:

http://www.rctech.net/forum/electric...-1-thread.html

No
I have the right thread , do you have B44 Matt ?

01-03-2013 | 09:10 AM

#1595

Matt Trimmings

Tech Champion

iTrader: (171)

Joined: Jun 2006

Posts: 6,313

From: Tucson AZ

Quote:

Originally Posted by Wild Cherry

No
I have the right thread , do you have B44 Matt ?

why the pics of the .1 then?

01-03-2013 | 09:32 AM

#1596

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Quote:

Originally Posted by Matt Trimmings

why the pics of the .1 then?

Because this is the B44 thread not just for b44.2..
BTW my B44 is in construction, changing it into 44.2

Got a B44 Matt ?

Show me !!!!

01-03-2013 | 09:35 AM

#1597

Matt Trimmings

Tech Champion

iTrader: (171)

Joined: Jun 2006

Posts: 6,313

From: Tucson AZ

Quote:

Originally Posted by Wild Cherry

Because this is the B44 thread not just for b44.2..

Got a B44 Matt ?

Show me !!!!

The AE FActory Team B44.2 Thread

01-03-2013 | 09:36 AM

#1598

fq06

Tech Champion

iTrader: (12)

Joined: Dec 2011

Posts: 5,646

From: Los Angeles

Quote:

Originally Posted by Wild Cherry

Because this is the B44 thread not just for b44.2..

Got a B44 Matt ?

Show me !!!!

This is The AE FActory Team B44.2 Thread.

But anyone is welcome... it's just a forum.
Nice ride too WC.

01-03-2013 | 09:40 AM

#1599

Matt Trimmings

Tech Champion

iTrader: (171)

Joined: Jun 2006

Posts: 6,313

From: Tucson AZ

I don't need to have a B44.2 to post in this thread...it's not a prerequisite. I am just here to help others. I have owned pretty much every AE electric car over the years and offer help to anyone.

01-03-2013 | 09:42 AM

#1600

Bigfoot1

Tech Adept

iTrader: (4)

Joined: Apr 2011

Posts: 194

Likely I missed it but doesn anyone else have the problem of the slipper coming loose during the race?

01-03-2013 | 09:48 AM

#1601

Maxime

Tech Apprentice

Joined: Dec 2012

Posts: 75

From: Quebec City

I had that problem... But I installed the oring on the slipper shaft and the blue nut after... The oring should go INSIDE the blue nut. I tried it last night and the slipper didn't come loose.

01-03-2013 | 09:53 AM

#1602

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Quote:

Originally Posted by Matt Trimmings

I don't need to have a B44.2 to post in this thread...it's not a prerequisite. I am just here to help others. I have owned pretty much every AE electric car over the years and offer help to anyone.

You mean you come here & ask why I post here & you don't even have one !!!!

I understand Matt ...

This ride is not cheap ....

I was lucky ...

Got mind from a teammate who just finish it when his B44.2 came in the mail the next day ..

called
KICK DOWN ....

Its got all the bing on her including the Triad slipper...

Still had to purchase the Flow , servo , receiver & T.P. myself...

Next I order all the B44.2 parts .....

01-03-2013 | 09:55 AM

#1603

Matt Trimmings

Tech Champion

iTrader: (171)

Joined: Jun 2006

Posts: 6,313

From: Tucson AZ

Quote:

Originally Posted by Wild Cherry

You mean you come here & ask why I post here & you don't even have one !!!!

I understand Matt ...

This ride is not cheap ....

I was lucky ...

Got mind from a teammate who just finish it when his B44.2 came in the mail the next day ..

called
KICK DOWN ....

Its got all the bing on her including the Triad slipper...

Still had to purchase the Flow , servo , receiver & T.P. myself...

Next I order all the good B44.2 parts .....

wow