Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#2327
#2328
#2329
i'm not the best driver after coming off a year break, and its handled my abuse well. i am super pleased with the car
#2330
so far i broke rear hub carrier front and rear wide hinges now running the narrow aluminum ones i think it working better actully . but i drive kinda wild sometimes that all so far the car has taken some real abuse i think its a great car all the people that have drove it like it nobody has said anything about it aside from price!!
#2331
Tech Master
iTrader: (121)
Rear hinge pin holders, steering rack, rear camber block, and ball studs pulling out of caster blocks are what I've seen break. Aluminum holders, Exotek rack, long ballstuds with a nut on the bottom of rear inner ballstuds, and long ballstuds in the caster blocks have solved those issues for me.
#2332
i can't imagine needing any of that outside of the normal parts, no need to get all aluminum, they beefed up a few parts from the RB5, i'd say grab towers, the exotek rack, arms and front hubs. they say you need the long studs and i bought them, but haven't put them on, just use the set screws in the other positions..
the buggy is solid.
the buggy is solid.
#2333
Tech Elite
iTrader: (14)
saw this gem in another thread. any guys looking to shed 61g's?
they say they're holding in a 1/10th buggy. since i run stock 17.5 i wonder how these would help?
http://www.amainhobbies.com/product_...=Product-Feeds
anyone with experience? or thoughts?
they say they're holding in a 1/10th buggy. since i run stock 17.5 i wonder how these would help?
http://www.amainhobbies.com/product_...=Product-Feeds
anyone with experience? or thoughts?
#2334
Tech Regular
iTrader: (15)
mid motor racing
I ran the RB6 in mid motor today ...all i can say is wow!!! the car was awesome in the main i was TQ and ran away with it from start to finish turning in a blistering 26 laps in 7:15 that is faster then anything has ran on that track . i will have the race video up tomorrow . if anyone is interested in my setup i can post up .
#2335
I ran the RB6 in mid motor today ...all i can say is wow!!! the car was awesome in the main i was TQ and ran away with it from start to finish turning in a blistering 26 laps in 7:15 that is faster then anything has ran on that track . i will have the race video up tomorrow . if anyone is interested in my setup i can post up .
#2337
I went with a shorty and came up with this configuration on my RB6.
#2338
#2340
Tech Master
iTrader: (5)
I ran the RB6 in mid motor today ...all i can say is wow!!! the car was awesome in the main i was TQ and ran away with it from start to finish turning in a blistering 26 laps in 7:15 that is faster then anything has ran on that track . i will have the race video up tomorrow . if anyone is interested in my setup i can post up .