Good evening Ray A Racing

I sent you a piston/sleeve for resizing. This was a .28 and it wasn't really too bad, but, bad enough. You resized the pair and now they are back in the engine, break in done and running well. My original problem was no bottom end what so ever on the truggy. I think there were several issues with this truggy like composite clutch shoes, bad bearings all of which were new when installed. So, I changed and put a fresh set of bearings in, and a new clutch. Engine after break in did start to product more bottom end but, not as snappy as I had expected. Well, come to find out, the clutches was worn out because the shoes were some cheap soft metal shoes. Well, 3rd time was a charm, a fresh set of shoes, new bearings, and the truggy seems much better.

I still think the engine should product more gut wrenching bottom end so I am going to try a JP1 pipe to bring the bottom end online sooner.

Anyway. Thanks much for the resizing. I'm sure the engine needed it and I can tell the engine is more lively as before, there wasn't any power from the engine at all.

Thanks again.

I'll send more your way as they come up.

Dr. Evil

Billy, Confirmed Saturday delivery, along with other packages, Ray(NJ) Carlyle(NYNY) Jim(OH) Jason(NY) Ken(TX) All set on the bench yesterday, services in process, return ships today + tomorrow.

Jeff, Tooling order tested , packaging today to go tomorrow morning.

Tooling orders come in this week will go out early next. Nows the time to place tooling orders. Another week or two......email me with questions.

Kind regards,

Ray
RayAracing

Ray...we are loving the tooling...works amazingly well................. All the re pinches we had you do are working flawless !!!! good work dude !

Ray - Just a quick note to say I ran Sunday using one of the 4 sets you did for me, and the motor ran better than when it was new. I couldn't be more pleased. As Ahnold would say, "I'll be back..." Thanks for the great service!!

what he can do is amazing , Ray is the magician with p/s sets , trust me Ray has tricks up his sleeve that nobody will ever figure out , which is why he is and will always remain #1 !!

Quite a few resizing guys are tooled by RayAracing. Second best isn't bad. I'd like to think that for the racer knowing their local resizer that which is tooled by RayAracing , their service should give them good results. I cant help not to like what I have done , still do now , and will continue to do in the RC racing business.

Bob(OH) first tooling order to go out next week.

Service orders went out this morning Mike(IN) Wayne(KS) Daniel(NYNY) Steve(CT) Houstons Engine Services(OR) JamesAR) Chad(IN)

Packages received today(going back in shop momentarily to work more) go out first thing Monday morning Kyle(FL) and Chris(MO)

Thanks guys

kind regards,

Ray
RayAracing

Thanks Ray

I got my piston and sleeve on Saturday and was able to put it in my truggy and do a break in before the main on Sunday of the Jconcepts Clash in Flowood, Mississippi.

My Bonito was making awesome power and was able to get a 5th place finish in the truggy A-main.

Hi Ray

Just a heads up, the following left yesterday your way:

4 sets p/s Vspec
1 set p/s Speed
1 set p/s Nova

Esteban

Esteban,
Package arrived on Saturday while we were building Shelter over Hektor's kennel. Back to doing inside finish work shop addition, weekend projects now.

Mike (WI) arrived also, Should have both orders (10 sets) completed and return shipped tomorrow.

Thanks guys!

Ray
RayAracing

What's the good word Ray ?

Hi Esteban,
Serviced and return shipped USPS priority mail Wednesday oct 3rd , tracking PM'ed to you. All 6 Came out sweeeeet you should receive today

On my way to Tool+Die shop now, stopping at post office doing my morning shipping, Tim(CO) Mike(CA) and Mike(Ontario Canada)

Thanks guys

Ray
RayAracing

Great Ray, thanks !!! Can't wait !!

Esteban,
replyed to your PM, and thanks for confirming package delivery. Just returned home 2 day trip out of town. Working in shop tonight

On the bench is BinH(NY) Andy(TX) Steve(CT)

Bobert(OH) Your Resizing Tooling order in progress

Thank You Guys,

Ray
RayAracing

Ray

Thank you for great service !! Very impressed with your work, broke in the Speed, ran perfect without a hiccup !!!!

Esteban, Thank you for the feedback. The other 5 sets should just as easily rebreakin and run great as well. i dont think there were any sealing surface issues I couldn't work out/correct those sets.

John, Just replied to your PM along with forwarded shipping tracking number your order.

Ed(UK) your 8 sets ship first thing monday morning.

Shipped Saturday Arvin(NV) and Tony(VA)

Shipped Thursday Geoffrey(IL) John(KS) Stephan(CT) Todd(NY)and Judd(CA)

All other orders serviced and serviced last week customers should have received no latter than tomorrow. And alot of orders came thru the shop doors last week ..........I'm officially today caught up, with zero work on the bench'.

Its a new week for new resizing tooling or resizing Service orders

Thanks guys!!!!!

Ray
RayAracing