2Likes

Xray T4 '13

Reply Subscribe

Thread Tools

Search this Thread

10-13-2012 | 08:28 PM

#631

RCknight

Tech Elite

iTrader: (5)

Joined: Nov 2004

Posts: 2,294

Pivot ball style toe blocks would help with weight.

Sorry can't help it. lol

10-13-2012 | 08:54 PM

#632

303slowdown

Tech Elite

iTrader: (24)

Joined: Sep 2008

Posts: 2,300

From: Rapid City SD.

Quote:

Originally Posted by eds24

" Xray are the best represented manufacturer on the grid with a total of four T4s. " - Redrc

And someone said the T4 is slow?

I have a feeling that as the Team gets more time to dial in the T4 / get used to it..the results will improve even further.

who are you and why aren't you racing at 5280 raceway in denver. it says your in colorado but i haven't seen anyone with a t4 at the track yet.

10-13-2012 | 09:22 PM

#633

trigger

Tech Master

iTrader: (17)

Joined: Jun 2004

Posts: 1,500

From: SoCal

Looks like rcknight is trolling yet again.

10-13-2012 | 11:41 PM

#634

RCknight

Tech Elite

iTrader: (5)

Joined: Nov 2004

Posts: 2,294

I would like to see someone do a weight comparison out of curiosity.

10-14-2012 | 02:04 AM

#635

Mb3195

Tech Regular

Joined: Apr 2011

Posts: 421

Quote:

Originally Posted by EAMotorsports

They aluminum shocks weigh a bit more. That would be my guess as to where the extra weight comes from. And more screws.

EA

I had Tamiya shocks on mine which weigh more I'd imagine then the new shorter xray ones.

It's all irrelevant as I can easy make weight, with a 310g battery my car is coming in at 1352g, balance also seems pretty good, probably need 5g on motor side to be perfect.

10-14-2012 | 02:28 AM

#636

morgoth

Tech Elite

Joined: May 2010

Posts: 2,943

From: Belgium

Quote:

Originally Posted by RCknight

I would like to see someone do a weight comparison out of curiosity.

It is lighter :-) Look at the pictures.

This is my T4 and T3 2011 with a 2012 chassis and topdeck on the scale. I forgot to mount the battery posts on the T4, which is about 2g I guess.

The T4: http://cl.ly/K8b4

The T3: http://cl.ly/K8FO

10-14-2012 | 03:16 AM

#637

Tech Master

iTrader: (52)

Joined: Aug 2003

Posts: 1,535

From: Sydney

Quote:

Originally Posted by theatriks

Xray always makes the A just like all the manufacturters the problem is top 3 is rarely xray........and yet again yokomo 1st tamiya 2nd associated 3rd.....thats where xray needs to be!

Won ETS, Won Snowbirds, Won TITC, Won Roar Nationals, Won Pre worlds, ut failed at the worlds and the first round of ETS, But apparently you say it's never in the Top 3?

Really? I could go back through ETS and I guarantee it was in the top 3 at Most of them.

10-14-2012 | 04:19 AM

#638

WRR

Tech Adept

Joined: Mar 2011

Posts: 116

My ride weighed in at 1270 grams race ready with Speed 6 Lw body. Did not really need to use 38 aluscrews on there...
Although i can place the additional wight closer to the ground lowering the CG even further.

10-14-2012 | 04:40 AM

#639

RCknight

Tech Elite

iTrader: (5)

Joined: Nov 2004

Posts: 2,294

Bucketboy can you post some pics of your mod?

Quote:

Originally Posted by bucketboy

Yep, I turned up two 16mm delrin washers 5mm thick, with longer counter sunk screw I fixed them through the top bumper plate into the bumper towers. The washer are now in contact with the front bulkhead, I replaced the bumper with a stiffer TC4 bumper that cut down to the thickness of the new Xray T4 bumper.

Ok it might undermine 1000 hour of testing and R&D by Team Xray drivers but Team Xray would buy me a new chassis if I damage it?................err, no!

PS the new bumper weighs 3grms, usless as a bumper but makes a great fake moustache for the kids