Go Back  R/C Tech Forums > General Forums > Electric Off-Road
The AE FActory Team B44.2 Thread >

The AE FActory Team B44.2 Thread

Community
Wiki Posts
Search

The AE FActory Team B44.2 Thread

Thread Tools
 
Search this Thread
 
Old 09-24-2012 | 04:59 PM
  #31  
cnelson3's Avatar
Tech Master
iTrader: (66)
 
Joined: Nov 2010
Posts: 1,214
From: Milwaukee, WI
Default

Originally Posted by CT RACER
No Im almost positive the pros are not gonna run that battery tray and gear cover everything else yes! I'm not Ill just keep getting them 44.1's till I can no longer can! And no I don't want it! I'm keeping my big bore conversion with my associated bb springs! I like it better than the big bores! Personally!
associated cars didn't need the big bores. I'm not going to say their shocks couldn't have used improvement but they did great without them.
cnelson3 is offline  
Old 09-24-2012 | 05:02 PM
  #32  
Jmuck69's Avatar
Tech Champion
iTrader: (14)
 
Joined: Jan 2010
Posts: 5,061
From: Atlanta, GA.
Default

Originally Posted by CT RACER
No Im almost positive the pros are not gonna run that battery tray and gear cover everything else yes! I'm not Ill just keep getting them 44.1's till I can no longer can! And no I don't want it! I'm keeping my big bore conversion with my associated bb springs! I like it better than the big bores! Personally!
Wheel and fire bad.
Jmuck69 is offline  
Old 09-24-2012 | 05:13 PM
  #33  
Tech Elite
iTrader: (53)
 
Joined: Feb 2008
Posts: 4,513
From: Belleville, MI
Default

I want, part number and ETA please! I need a new wheeler before the first weekend of November. Get on it AE!
nv529 is offline  
Old 09-24-2012 | 05:21 PM
  #34  
seth556's Avatar
Tech Elite
iTrader: (43)
 
Joined: May 2005
Posts: 2,233
From: Orlando, FL
Default

What's wrong with a spur guard and battery hold downs? You'd rather screw multiple nuts down each time you want to change the battery rather than flick two plastic things around?
seth556 is offline  
Old 09-24-2012 | 05:22 PM
  #35  
Tech Elite
iTrader: (53)
 
Joined: Feb 2008
Posts: 4,513
From: Belleville, MI
Default

Originally Posted by seth556
What's wrong with a spur guard and battery hold downs? You'd rather screw multiple nuts down each time you want to change the battery rather than flick two plastic things around?
+1 I like the new strap..
nv529 is offline  
Old 09-24-2012 | 05:22 PM
  #36  
Kraig's Avatar
Super Moderator
iTrader: (81)
 
Joined: Aug 2001
Posts: 7,015
From: Sun Prairie, WI
Default

Originally Posted by nv529
I want, part number and ETA please! I need a new wheeler before the first weekend of November. Get on it AE!
ASC9062.
Kraig is offline  
Old 09-24-2012 | 05:57 PM
  #37  
Jmuck69's Avatar
Tech Champion
iTrader: (14)
 
Joined: Jan 2010
Posts: 5,061
From: Atlanta, GA.
Default

Where was the picnic the details found? AE hasn't updated their website
Jmuck69 is offline  
Old 09-24-2012 | 06:06 PM
  #38  
07Forester's Avatar
Tech Master
iTrader: (10)
 
Joined: Jan 2012
Posts: 1,534
From: Yorkville, IL
Default

Looks like i'll have a week old b44.1 for sale
07Forester is offline  
Old 09-24-2012 | 06:08 PM
  #39  
littlevette's Avatar
Tech Master
iTrader: (22)
 
Joined: Apr 2009
Posts: 1,480
Default

so what's the deal with this "ad"? i didn't see anything on associated's site or anywhere else on a "b44.2". to me it seems like a waste to upgrade this buggy like that.
littlevette is offline  
Old 09-24-2012 | 06:08 PM
  #40  
Bburns's Avatar
Tech Addict
iTrader: (4)
 
Joined: Dec 2010
Posts: 683
From: Masury Ohio
Default

Originally Posted by 07Forester
Looks like i'll have a week old b44.1 for sale
Why sell it? Just upgrade it. Mine hasn't even been on a track. I'm just gonna upgrade
Bburns is offline  
Old 09-24-2012 | 06:11 PM
  #41  
MOmo's Avatar
Tech Master
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,633
From: Oregon
Default

It would figure that a 44.2 comes out just as I finish my 44.1!!!!


No worries. honestly, IMO the BB is take it or leave it, the Avid Slipper, same, battery holder, eh. I'll keep my 44.1


See people, they didn't have to re-write the book, just an update. For all those who want a new car, Subtle updates are all that's needed!



MOmo
MOmo is offline  
Old 09-24-2012 | 06:18 PM
  #42  
Odin544's Avatar
Tech Elite
iTrader: (93)
 
Joined: Apr 2011
Posts: 3,152
From: Kennewick, Washington
Default

I see no source for info or any other info posted on the web. Seems pretty bogus at this point.
Odin544 is offline  
Old 09-24-2012 | 06:19 PM
  #43  
OptimumRC's Avatar
Tech Adept
iTrader: (6)
 
Joined: Feb 2012
Posts: 222
Default

Originally Posted by Bburns
Why sell it? Just upgrade it. Mine hasn't even been on a track. I'm just gonna upgrade
Good luck with that...Although it looks very similar there are lots of little subtle changes that require a lot of parts.

For example notice that the spur gear cover is longer to accommodate the VTS slipper and the battery tray no has a spacer in it so it no longer in a net fit on the battery.

Therefore the chassis must be longer and as a result you will probably need new center CVA's, maybe a top deck? The rear one looks different in the photo, front and rear shock towers and oh yeah, big bores! That doesn't sound like a cheap upgrade!
OptimumRC is offline  
Old 09-24-2012 | 06:22 PM
  #44  
big chris's Avatar
Tech Fanatic
iTrader: (51)
 
Joined: Nov 2006
Posts: 756
From: Fort Smith, AR
Default

More info:


The RC10B44 is a proven winning platform with two I.F.M.A.R. World Championships and four R.O.A.R. National titles under its belt!

The B44.2 Factory Team kit takes the next step in drawing out every opportunity to maximize the 4WD buggy's potential.

The big news on the B44.2 is the new Factory Team 12mm 'Big Bore' hard-anodized shocks. The shocks feature threaded collars, machined aluminum shock caps with bleed screws, and are completed with TiN "Gold" 3mm shock shafts.

The end result is a 12mm shock that delivers a plush and compliant ride that keeps the B44.2's tires planted on the ground.

The B44.2 also received an updated 2.5mm carbon-fiber chassis that is 8mm longer and 3mm narrower than the previous model. This not only improves stability and overall handling of the B44.2 but also accommodates the new LiPo quick-change battery mounting system, and VTS multiplate slipper assembly.

The engineers in Area 51 have once again evolved the B44 to keep it a winner, while everyone else is just trying to keep up. If you're ready to step up your 4WD program, the B44.2 is ready for you!
big chris is offline  
Old 09-24-2012 | 06:24 PM
  #45  
chewiefttc4's Avatar
Tech Master
iTrader: (28)
 
Joined: Oct 2006
Posts: 1,677
From: Bristol tn
Default

Originally Posted by CT RACER
No Im almost positive the pros are not gonna run that battery tray and gear cover everything else yes! I'm not Ill just keep getting them 44.1's till I can no longer can! And no I don't want it! I'm keeping my big bore conversion with my associated bb springs! I like it better than the big bores! Personally!
this is my first post in a few years. and i had to comment. . everyone knows that carbon makes you faster bro! pfft. maybe the plastic battery straps allow the chassis to flex more?
chewiefttc4 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.