Hi Guys

Just some info as you guys are aware that we at Hobbywing produce nearly 60% of the worlds racing brands as in orion,Hpi,yokomo,Sp Gt series etc etc .

I will help you guys with the tech support on all the brands that are oems but i cannot do anything for you when it comes to warranty that must be handled by the brand and company example hpi or orion etc .

thanks for your time

Angelo

talking about the sct pro esc etc ?

any help?

Angelo,

I remember you wrote once that will give us a guide for the settings of v3. Have you publish it as I can't find it

Thank you

does anyone have a good startingpoint for 17.5 boosted

Motor: trinity revtech, esc: xtremestock

small/med size carpet

how is the brake setting rules? I can not turn while braking. It must be brake and then turning. Please help

Hobbywing XERUN Black 120A 1S esc
-----------------------------------
Can this run v3 508 No Timing sofware? It has it loaded but won't program to the transmitter.

Can it be undone if it has to be?

If your brakes are working then the ESC has done its job, and you have a chassis handling, or driving issue. Your tires only have a limited amount of grip, if they are using all of the grip to slow/stop your car then there wont be enough grip to also change the direction of the car. Thats why it wont turn, and pushes to the outside of the corner.

If you drive a full size car the same thing happens, and you should NEVER be using your brakes IN the Corner. You should either be letting the chasiss ROLL, or slight acceleration to pull the car around, and out of the corner.



Hope this helps you,

Shawn.

What do you exactly mean?
You can't steer the wheel while braking?
Your wheels steer but your car keeps on going straigth?

If your car can't steer (but wheels do) while braking, that's exactly what Shawn68z said.
Otherwise, it's a battery problem, not enough current available.

Just got back to racing after 1 year break..

Please help me with Best set up for ESC HW Xerun 120A V2.1 w/930STOCK 10.5T motor with 2cell lipo battery (1/10 Touring Car Racing)

note: will use for small technical track
Appreciated your help.. Thanks

all of the speedos that can run that motor. i have that issue with my sct pro, v2.1 and v3

what do you mean "out of sensor mode"?? IS that both red/green lights blinking even tho everything is still plugged in and untouched as mine does that quite a bit and dont notice until im pretty much done running a pack or testing w/o the body

Connect the Speedo to a 2S Lipo and remove the low voltage cutoff, then you can bind to your transmitter using a 1S cell. The LVC stops you from binding as it's expecting 6v minimum as standard (auto, 2S Lipo)

Any issues, please let us know.

Hi Puma, which motor and class are you running in ?

it is a Lipotech XR 10.5T SPECIAL KIT, I do not know the class. It 'a few days ago that I use the electric.