4Likes

NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

Reply Subscribe

Thread Tools

Search this Thread

08-17-2012 | 12:11 PM

#9706

lewis110

Tech Master

iTrader: (3)

Joined: Jan 2012

Posts: 1,117

From: Hallstead, PA

CRC is Hobbywing USA

08-17-2012 | 01:10 PM

#9707

Fred Hubbard

Tech Elite

iTrader: (6)

Joined: Nov 2001

Posts: 2,721

From: Inglewood, CA

Quote:

Originally Posted by syndr0me

If FalconSekido is "Hobbywing of North America" then what is CRC?

Quote:

Originally Posted by lewis110

CRC is Hobbywing USA

They along with Schuur Speed are all authorized North American distributors.

08-17-2012 | 01:35 PM

#9708

pauper

Tech Initiate

Joined: Jul 2011

Posts: 22

From: Portugal Madeira

Quote:

Originally Posted by Pro10noob

With a FDR of 4.3??
No wonder the motor is running hot.
Go up to 5.5 and temp again.
I was running a FDR of 7.5 on a tech track with a straight of 50 meters.
Motor temp was 71 degrees celcius after 7 minutes.

regards Roy

Thanks i'll try an Fdr higher 5.5 / 6.0

08-17-2012 | 01:54 PM

#9709

Pro10noob

Tech Elite

iTrader: (14)

Joined: Apr 2009

Posts: 2,110

From: The Netherlands

To make it clear for me and yourself, it was the motor that was getting hot and not the ESC??

regards Roy

Quote:

Originally Posted by pauper

Thanks i'll try an Fdr higher 5.5 / 6.0

08-17-2012 | 09:22 PM

#9710

SeanV

Tech Apprentice

iTrader: (1)

Joined: Jul 2010

Posts: 82

From: South Africa

Quote:

Originally Posted by SeanV

Thanks Angelo, I got the files and copied them into the correct folder.

C:\Program Files (x86)\Hobbywing USB Link V3.1

I overwrote my existing files but when I start USB Link, I still get stuck on the same scree.

Woohooo... this morning it actually got through the update without any problems.
Not sure why it started working again but no complaints here.

08-17-2012 | 10:03 PM

#9711

ScottyTC4NZ

Tech Apprentice

Joined: Jan 2010

Posts: 80

From: New Zealand

Hey guys, can you run v3 with out capacitor on as I had a issue and smoke came out of capacitor,so took it off and the esc works find, I have a capacitors upgrade kit here, which has 4 cap head on it, will this be ok to used? They have on 93A1 471 16

Need to know ASAP as I have to race tomorrow

Last edited by ScottyTC4NZ; 08-17-2012 at 10:25 PM.

08-17-2012 | 10:51 PM

#9712

kermit

Tech Addict

iTrader: (3)

Joined: Oct 2004

Posts: 505

From: Australia

Quote:

Originally Posted by ByteStream

Angelo,

Can you explain the differences between v3_120612 and v3_120808 USB software?

What was changed/added/removed/fixed/etc?

Please explain!

08-18-2012 | 01:08 AM

#9713

COBRARACING

Thread Starter

Tech Elite

Joined: Nov 2007

Posts: 3,338

Quote:

Originally Posted by Fred Hubbard

They along with Schuur Speed are all authorized North American distributors.

All three are hobbywing Authorised north American Ditributors plus crc is also Canadian Authorised .

08-18-2012 | 01:11 AM

#9714

COBRARACING

Thread Starter

Tech Elite

Joined: Nov 2007

Posts: 3,338

Quote:

Originally Posted by kermit

Please explain!

More power for the v3 ,smoother plus better at low rpm you dont get thst stepper feeling from the motor.We will also implement neutral range in a week or two as a function.

08-18-2012 | 02:14 AM

#9715

FLAT OUT

Tech Regular

Joined: Apr 2009

Posts: 282

V3 Question

Hi people
When I connect my V3 to the digital program box and turn it on it comes up with V1.11_120331_V3 is this the current version/software for my V3 ?? If not what is the new one and how do I get it and install it

Many Thanks

08-18-2012 | 03:29 AM

#9716

puma303

Tech Apprentice

Joined: Jul 2012

Posts: 50

hello all
Today I paired my new hobbywing motor 4000 Kv (the 4.5T sensorles). I also connected the cable to the sensor but my program box 2 in 1 does not find the option to enable or disable the sensor. I wanted to know if i could only do via PC, I have no way of being able to connect to the computer and test now. Thanks for the replies. (The ESC is always 150A)

Last edited by puma303; 08-18-2012 at 03:39 AM.

08-18-2012 | 03:45 AM

#9717

pmc

Tech Adept

Joined: Oct 2008

Posts: 173

From: Pinhal novo - Portugal

Quote:

Originally Posted by COBRARACING

More power for the v3 ,smoother plus better at low rpm you dont get thst stepper feeling from the motor.We will also implement neutral range in a week or two as a function.

Keep the Good Work

08-18-2012 | 05:16 AM

#9718

FFred

Tech Apprentice

Joined: Jul 2010

Posts: 78

Quote:

Originally Posted by COBRARACING

Quote:

Originally Posted by Fred Hubbard

Quote:

Originally Posted by syndr0me

If FalconSekido is "Hobbywing of North America" then what is CRC?

Quote:

Originally Posted by lewis110

CRC is Hobbywing USA

They along with Schuur Speed are all authorized North American distributors.

All three are hobbywing Authorised north American Ditributors plus crc is also Canadian Authorised .

Then there's a problem in every naming since North America = USA+Canada :

CRC should be "Hobbywing North America distributor" (and not USA only)
FalconSekido and Schuur Speed should be "Hobbywing USA distributors" only (and not North America)

08-18-2012 | 06:48 AM

#9719

ezh_m5

Tech Apprentice

Joined: Dec 2010

Posts: 60

From: Saint P.

can anyone give me a set up boost turbo
for x12 10.5T and xerun v3 120 a?

I always ride zero timing no boost but want to try.

08-18-2012 | 07:32 AM

#9720

ByteStream

Tech Master

iTrader: (2)

Joined: Jan 2010

Posts: 1,146

From: 5280 Raceway

Quote:

Originally Posted by COBRARACING

More power for the v3 ,smoother plus better at low rpm you dont get thst stepper feeling from the motor.We will also implement neutral range in a week or two as a function.

Sounds good as the neutral range I feel is a needed function.

ROAR currently has V1.1_120511_beta as the approved version of the V3 software which is not the current version .. are there plans to get the current version approved ... (IIC is the first week of October)