18mm, .71in

I would of loan you my ft links for a while ..

Takes a bit of effort & work to follow a set-up to the letter but well worth it ...

Yes

I'll haul the PINK back to the track today for you, the Ti rods are all yours if you need .

Eighty-seven

Some users have PM'ed me for Cam's setup. Here it is:

http://www.rctech.net/forum/electric...l#post10865994

?

Is there a pic of the BK link set up. In his sheet it says buggy c hub flipped upside down mounted to rear hub to raise link?? 12mm ball stud on inside with 7mm spacers ok?

Let the 8mm conversations start! Its to raise the roll center of the car 8mm. the hub with the c hub is raised 8mm and the rear, inner ball stud has 7mm of spacers under it, therefore needing the 12mm, longer ball stud

:[QUOTE=Wild Cherry;11061153]I'll haul the PINK back to the track today for you, the Ti rods are all yours if you need .[/QUOTE

Do a search on this thread or on google and there is like tons of pics. There are a bunch of pages about it here too

well WC i did 2 things to the truck.. change the tires up front to the RTR's and re-checked ride height.. the truck felt more consistent and not as twitchy.. first 2 rounds of qualifying i got a 14 lap pace which is fast in the pro4 class.. couldnt believe it. barcodes on the front are way too aggressive for my liking.. also got the fastest lap last night too! 21.9! ride height is at 23 all around..

I just dont get the buggy c hub flipped. All I can find is the b44.1 rear hub extenders added to the sc10 4x4 rear hub to get to 8mm. No where can i see a c hub

the c hub is the carbon fiber piece for the b44 hub

http://teamassociated.com/pictures/n..._212656_lg.jpg

there you go bro!