Community
Wiki Posts
Search

RC10B4.1 FT/WC

Thread Tools
 
Search this Thread
 
Old 07-19-2012 | 07:28 PM
  #16861  
TeamWTF's Avatar
Tech Fanatic
iTrader: (11)
 
Joined: Apr 2010
Posts: 976
From: Newcastle, Australia
Default

I'm keen to try the ESC above the battery. Would like to mount it on lexan or something though.

With the ESC on the LHS and receiver on the RHS, the weight distribution is all wrong. I switched it around long ago and its perfect.

It would have been nice if this was fixed with the worlds car (Motor needs to be moved in)
TeamWTF is offline  
Old 07-19-2012 | 07:33 PM
  #16862  
jf+'s Avatar
jf+
Tech Regular
iTrader: (1)
 
Joined: Jan 2012
Posts: 329
From: Gilbert, AZ
Default

Originally Posted by mxracer458
I raced 2 weeks ago and I saw cavs car set up with the esc on the battery strap and his rec in the regular spot
So, as far as you can figure, how does he have this installed? Velcro on the battery strap itself? Or some fabbed shelf? Would be nice to be able to fit my ESC under the body with some more breathing room...
jf+ is offline  
Old 07-19-2012 | 08:36 PM
  #16863  
mxracer458's Avatar
Tech Elite
iTrader: (47)
 
Joined: Mar 2007
Posts: 3,983
From: so cal
Default

What fdr should I be aiming for in 17.5 blinky class?
mxracer458 is offline  
Old 07-19-2012 | 08:49 PM
  #16864  
gogi108's Avatar
Tech Addict
iTrader: (9)
 
Joined: Feb 2011
Posts: 608
From: brisbane
Default

Originally Posted by mxracer458
What fdr should I be aiming for in 17.5 blinky class?
I run 5.35 , 35 72 fantom ion2 xerun combo .
gogi108 is offline  
Old 07-19-2012 | 09:04 PM
  #16865  
Wildcat1971's Avatar
Thread Starter
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default

Originally Posted by jf+
So, as far as you can figure, how does he have this installed? Velcro on the battery strap itself? Or some fabbed shelf? Would be nice to be able to fit my ESC under the body with some more breathing room...
The servo tape I use would hold it. 3m outdoor 5 lbs double sided tape

http://www.amazon.com/3M-Scotch-4011...ef=pd_sbs_op_1
Wildcat1971 is offline  
Old 07-19-2012 | 09:23 PM
  #16866  
Waflet's Avatar
Tech Master
iTrader: (35)
 
Joined: Oct 2011
Posts: 1,926
From: helena, alabama
Default

Hideeho
I'm running the t4 chassis & am considering putting the ESC in the battery tray under the strap w/ a shorty. I'm worried about upsetting the front/rear balance though. The setup I'm running just doesn't like the full size lipo. I figure I'll give it a try eventually fully expecting to put it back on the side.

When you swap side w/the ESC & RX what do you do w/ the antena? I'm running a 3100 so it actually has a little length to it.
Waflet is offline  
Old 07-19-2012 | 09:24 PM
  #16867  
Wildcat1971's Avatar
Thread Starter
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default

you use a truck chassis on your buggy? How well does that work?
Wildcat1971 is offline  
Old 07-19-2012 | 09:51 PM
  #16868  
Waflet's Avatar
Tech Master
iTrader: (35)
 
Joined: Oct 2011
Posts: 1,926
From: helena, alabama
Default

Hideeho
To be perfectly blunt about it, I'm not one of the hot shoes @ my local track, so it works great for me! The advantage is it's much easier to control. I can place it where I want in a corner easier. The reason this is true is also why the really fast guys won't like it, everything happens slower. The rearend comes out slower so is easier to catch. When it starts to push you can see it happen & correct it before it becomes a problem. As it sits right now, the guy that the fastest lap in buggy got a 16.9 w/ his b4.1 & regularly runs mid to upper 17's. The best he could do with mine was an 18.5. I figure it has got another second in the setup, but that's about it. When I get to where I'm CONSISTANTLY turning laps 1/2 to 1 sec off the pace I will go back to the +8. Right now I'm consistantly turning high 19-20 second laps (previous to tuning last night). Previously I was ranging for 18-30 second laps with the +8.

To sum up, if your one of the fastest drivers at your track, don't bother. However, if your like me & are not hitting within .5 second every lap, it is SO WORTH IT! Just make sure to use a shorty pack mid or rear depending on taste.
Waflet is offline  
Old 07-19-2012 | 09:53 PM
  #16869  
OptimumRC's Avatar
Tech Adept
iTrader: (6)
 
Joined: Feb 2012
Posts: 222
Default

I think that mounting all the electronics down the center will still be a minute change to handling.

You may increase transient response of the car in roll, but I think that benefits from the chassis just being narrower preventing the likelihood of the chassis scrapping on the ground would be a greater benefit.
OptimumRC is offline  
Old 07-19-2012 | 10:05 PM
  #16870  
jf+'s Avatar
jf+
Tech Regular
iTrader: (1)
 
Joined: Jan 2012
Posts: 329
From: Gilbert, AZ
Default

This may sound like blasphemy, but has anyone successfully put a 1/10 car body on the B4.1? Yeah, I have the +8, but I could always switch back if needed...

What I'm thinking of is putting a rally body on the car. Think STI, Focus, Evo etc. etc.... Can this be done?

Forgive the question if it offends your buggy sensibilities, but the thought of a fully-functional RWD rally car with a great chassis and all the goodies underneath -without having to buy another car- has me all excited...
jf+ is offline  
Old 07-19-2012 | 10:53 PM
  #16871  
FACTORYBUTNOT's Avatar
Tech Regular
 
Joined: Mar 2008
Posts: 307
Default

Hey JF I haven't done that but it sounds cool! You should do it and post pics!
FACTORYBUTNOT is offline  
Old 07-19-2012 | 10:58 PM
  #16872  
brent701's Avatar
Tech Master
iTrader: (8)
 
Joined: Oct 2011
Posts: 1,590
Default

Originally Posted by gamedog1966
I know several mod guys that are very fast driving viper
So do I..THey also have the Black Can motor's


Originally Posted by idrummerboy13
really? the esc is a little funky but the motors are to good.......


Its sad to see people throw others down, its all for fun here guys
I have ran viper and compared to my reedy 13.5 it's like a 27t brushed motor.

I had vipers in 3 different cars. and most of the time was not keeping up with the other 13.5's (Many people can back that up here also) I have Had Viper look into and try to help me with no luck. All viper stuff was sold.

I do give them one thing though.. Profile 3 and a 13.5 in a T4.1 geared 20/84 was **&^* FAST.. Only one to back flip at the track I race at.
brent701 is offline  
Old 07-20-2012 | 04:43 AM
  #16873  
bds81175's Avatar
Moderator
iTrader: (20)
 
Joined: Jan 2011
Posts: 2,745
From: Litchfield, Minnesota
Default

I have a Viper VTX10 mounted on the battery strap with the same insanity tape that Wildcat was showing earlier. The main reason I did it was because I am running an RCRD aluminum chassis and they don't leave a great deal of room on the sides for electronics and they are sort of unprotected. Works like a charm and isn't going anywhere.
bds81175 is offline  
Old 07-20-2012 | 05:15 AM
  #16874  
Wildcat1971's Avatar
Thread Starter
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default

Any here owned a losi 22 have any thoughts on it compared to the b4
Wildcat1971 is offline  
Old 07-20-2012 | 05:19 AM
  #16875  
nikos2002's Avatar
Tech Champion
iTrader: (31)
 
Joined: Sep 2002
Posts: 5,057
From: any where I can race!
Default

brent - interesting that the truck was **&^* FAST.., but you had buggy concerns - seems like something in the esc set up was off.

I see a guy using a Viper 13.5 running his B4.1 in mod against factory drivers using 8.5 and 9.5 turning the same lap times. Depends on set up and driving style.
nikos2002 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.