RC10B4.1 FT/WC
05-27-2012 | 07:14 AM
Tech Regular
Joined: Nov 2011
Posts: 316
From: FL
one last question, i am going to buy the hobbywing justock 45a brushless esc and a revtech 17.5 motor and a savox sc-1257tg servo. i am using a gens ace 4000mah 30c 7.4v 2s lipo battery. the mains at my local track are about 4-5min. will my battery last for 4-5min mains?
05-27-2012 | 07:29 AM
one last question, i am going to buy the hobbywing justock 45a brushless esc and a revtech 17.5 motor and a savox sc-1257tg servo. i am using a gens ace 4000mah 30c 7.4v 2s lipo battery. the mains at my local track are about 4-5min. will my battery last for 4-5min mains?
05-27-2012 | 07:49 AM
Argh, trying to search about the hex conversion. What hexes ppl use? Is it AE, JC, Proline or Avid?
Is there a problem with JC hexes, are the screws ok?
And sorry about this question again, but I really tried to find it.
Atleast I didnt want to know the differenses about FT and the Worlds kit
Is there a problem with JC hexes, are the screws ok?
And sorry about this question again, but I really tried to find it.
Atleast I didnt want to know the differenses about FT and the Worlds kit
05-27-2012 | 07:56 AM
im setup at 24 mm ride front/rear
gold barcodes front and rear( slicks with firm foams)
front 32.5/ orange losi springs
rear 27.5/ white losi springs
middle on front shock tower and outside on the arm
inner on rear tower and inside on the arm
inner ballstud 1mm on front shock tower
inner hole on caster
middle on rear hub and inner 0mm on u brace
i forgot that i lowered my ride height tonight at the track to 23 mm it made a small difference
gold barcodes front and rear( slicks with firm foams)
front 32.5/ orange losi springs
rear 27.5/ white losi springs
middle on front shock tower and outside on the arm
inner on rear tower and inside on the arm
inner ballstud 1mm on front shock tower
inner hole on caster
middle on rear hub and inner 0mm on u brace
i forgot that i lowered my ride height tonight at the track to 23 mm it made a small difference
white for high bite seems soft...I had that happen to me and I just went up in a spring size. Of course Im on avids, way way better then losi springs.
05-27-2012 | 07:58 AM
Tech Adept
iTrader: (4)
Joined: May 2012
Posts: 154
From: Alabaster, AL
What can I do about the big bore springs rubbing the turn buckle in the rear. I have tried spacing it out but it seems to put the shock in a bind when I do that. I am new to the hobby about 3 months into it and have read most of this thread but dont remember seeing any thing about this.
05-27-2012 | 08:35 AM
Last night I had a Venom 5000mah 30c pack go bad. I went into the shop and bough another Venom 5000mah 30c pack. But they redesigned the case and put "feet" on the case and now it wont fit under my Carbon Fiber battery brace. I am running the original B4 FT, not a 4.1. Is my battery tray shorter than the new 4.1s? Should I dremel the "feet" off. Does anyone else have issues getting packs to fit?
05-27-2012 | 08:48 AM
Last night I had a Venom 5000mah 30c pack go bad. I went into the shop and bough another Venom 5000mah 30c pack. But they redesigned the case and put "feet" on the case and now it wont fit under my Carbon Fiber battery brace. I am running the original B4 FT, not a 4.1. Is my battery tray shorter than the new 4.1s? Should I dremel the "feet" off. Does anyone else have issues getting packs to fit?
05-27-2012 | 08:54 AM
Last night I had a Venom 5000mah 30c pack go bad. I went into the shop and bough another Venom 5000mah 30c pack. But they redesigned the case and put "feet" on the case and now it wont fit under my Carbon Fiber battery brace. I am running the original B4 FT, not a 4.1. Is my battery tray shorter than the new 4.1s? Should I dremel the "feet" off. Does anyone else have issues getting packs to fit?
05-27-2012 | 08:58 AM
Last night I had a Venom 5000mah 30c pack go bad. I went into the shop and bough another Venom 5000mah 30c pack. But they redesigned the case and put "feet" on the case and now it wont fit under my Carbon Fiber battery brace. I am running the original B4 FT, not a 4.1. Is my battery tray shorter than the new 4.1s? Should I dremel the "feet" off. Does anyone else have issues getting packs to fit?
05-27-2012 | 09:41 AM
I don't think there's a difference between the battery trays. I'm not sure why Venum put feet under there. I run the same Venom pack n my 4.1 but it didn't come with feet. If it was me, I'd carefully grind them off with a dremel. Just don't go too far. Just go a little at a time and keep checking. Let me know how it works
05-27-2012 | 09:46 AM
Yeah, I raised the posts, but it wont fit under the rear battery tray lip. So i had to put it on top of the battery box in the rear. it worked and survived a few hard crashes, but it annoys me, lol.