SC10 4x4 Thread
Not sure if they can be charged separately. I would assume so. But verify that first.
)I run primarily on outdoor tracks here, I wish I had more indoor.
got my ft done sans body. right now it has a havoc pro sc (non x drive) and a viper 5.0 l, strc steering kit along with strc pulleys, rcshox v2 pistons. my next paycheck ill probably get a rx8 esc. i have not tried tekin yet, i had the havoc sitting around.
it was a fun build and thank god my roommate has a cordless power drill. i got my diff dilemma solved, one of the 4x4 guys at the track built a spare gear diff with me so i could see what it should look like and how it should feel when done. after a few runs on street tires on the street, i wound up with a 13 tooth pinion and temping out at 135 after 6 minutes of hard running. should be close for the track this upcoming week.
it was a fun build and thank god my roommate has a cordless power drill. i got my diff dilemma solved, one of the 4x4 guys at the track built a spare gear diff with me so i could see what it should look like and how it should feel when done. after a few runs on street tires on the street, i wound up with a 13 tooth pinion and temping out at 135 after 6 minutes of hard running. should be close for the track this upcoming week.
I did not order a balance charge harness....and these have no balance ports...it looks like the reedy harness has 4mm bullets on end of balance leads...do these get plugged into where the jumper wire plugs?
do you have the leads to plug in?



5Likes