4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
04-03-2012 | 12:01 PM
#8461
Tech Regular
iTrader: (1)
Joined: May 2011
Posts: 306
New V3 Info
http://www.teamcrc.com/crc/modules.p...rder=0&thold=0
PS. We have a new website coming, just for you Lip
http://www.teamcrc.com/crc/modules.p...rder=0&thold=0
PS. We have a new website coming, just for you Lip
Please be gentle with the pricing...I will order an ESC/motor/programmer package if available and not too pricey
04-03-2012 | 12:12 PM
#8462
04-03-2012 | 12:15 PM
#8463
Tech Regular
iTrader: (1)
Joined: May 2011
Posts: 306
Sorry...I was only looking at the link he gave us...
That's more than I figured it would be...I was sure we would see this for $199...
CRC: Any package deals with this? With the programmer and a motor this is going to be past what I wanted to pay....
That's more than I figured it would be...I was sure we would see this for $199...
CRC: Any package deals with this? With the programmer and a motor this is going to be past what I wanted to pay....
04-03-2012 | 12:21 PM
#8464
04-03-2012 | 12:39 PM
#8465
New V3 Info
http://www.teamcrc.com/crc/modules.p...rder=0&thold=0
PS. We have a new website coming, just for you Lip
http://www.teamcrc.com/crc/modules.p...rder=0&thold=0
PS. We have a new website coming, just for you Lip
04-03-2012 | 12:41 PM
#8466
Tech Regular
Joined: Apr 2009
Posts: 253
Help me pick my next motor.
I currently run a 10.5 indoors, our track has approximatly a 50/60ft straight and is very tight and twisty, sometimes flowing sometimes now.
I need a new motor so was wondering wether people would recommend a 10.5, 13.5 or even a 17.5.
Speedo is an xtreme stock in an mi4
I currently run a 10.5 indoors, our track has approximatly a 50/60ft straight and is very tight and twisty, sometimes flowing sometimes now.
I need a new motor so was wondering wether people would recommend a 10.5, 13.5 or even a 17.5.
Speedo is an xtreme stock in an mi4
04-03-2012 | 04:04 PM
#8467
Tech Regular
iTrader: (1)
Joined: May 2011
Posts: 306
CRC:
Do you only have the one XERUN motor in stock? I'm looking for something for 2WD buggy....race on dirt and carpet...perhaps 8.5t?
I'll need a programmer as well.
If you can recommend something and perhaps if there is a combo deal that would help me click that purchase button!
Do you only have the one XERUN motor in stock? I'm looking for something for 2WD buggy....race on dirt and carpet...perhaps 8.5t?
I'll need a programmer as well.
If you can recommend something and perhaps if there is a combo deal that would help me click that purchase button!
04-03-2012 | 07:16 PM
#8468
Tech Apprentice
iTrader: (4)
Joined: Jan 2012
Posts: 56
I am not sure specifically. But I do know that boosting a 17.5 actually any (540 sized brushless motor) will increase its efficiency. That means you can actually get more run time with about the same amount of power output. I would suspect this is what is happening in your case. Just as a reference I would put the superstock software back in the ESC and turn off turbo and boost and see if you get similar results.
On a side note the efficiency of larger motors does not get a significant boost when increasing timing, that is why there is not much to gain from boosting the 550 sized motors or the larger 1/8 scale ones. They tend to just get hot and loose runtime.
On a side note the efficiency of larger motors does not get a significant boost when increasing timing, that is why there is not much to gain from boosting the 550 sized motors or the larger 1/8 scale ones. They tend to just get hot and loose runtime.
04-03-2012 | 07:24 PM
#8469
Thread Starter
Tech Elite
Joined: Nov 2007
Posts: 3,338
Hi guys
sorry for the only 150 units that were available at the beginning of the release of the v3 that was because of a spelling error on the cnc case as you will see from the advertisement on red rc
shouild read Hobbywing innovations but it read Hobbywing innovtions sorry for the mistake i guess the cnc factory needs to learn how to spell lol.
The flow of the v3 will start from monday all over the world
regards Angelo
sorry for the only 150 units that were available at the beginning of the release of the v3 that was because of a spelling error on the cnc case as you will see from the advertisement on red rc
shouild read Hobbywing innovations but it read Hobbywing innovtions sorry for the mistake i guess the cnc factory needs to learn how to spell lol.
The flow of the v3 will start from monday all over the world
regards Angelo
04-03-2012 | 07:43 PM
#8470
Hi guys
sorry for the only 150 units that were available at the beginning of the release of the v3 that was because of a spelling error on the cnc case as you will see from the advertisement on red rc
shouild read Hobbywing innovations but it read Hobbywing innovtions sorry for the mistake i guess the cnc factory needs to learn how to spell lol.
The flow of the v3 will start from monday all over the world
regards Angelo
sorry for the only 150 units that were available at the beginning of the release of the v3 that was because of a spelling error on the cnc case as you will see from the advertisement on red rc
shouild read Hobbywing innovations but it read Hobbywing innovtions sorry for the mistake i guess the cnc factory needs to learn how to spell lol.
The flow of the v3 will start from monday all over the world
regards Angelo
That just makes it more valuable. It's like when a baseball card company makes a mistake it becomes instantly a collectable
04-03-2012 | 10:40 PM
#8471
Thread Starter
Tech Elite
Joined: Nov 2007
Posts: 3,338
.
