57LikesThe Speed Passion Thread
03-30-2012 | 01:47 PM
#9181
03-30-2012 | 01:48 PM
#9182
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
All MMM motors came with red sensor, 11-20*.
And yes, all the other sensors are optional that you can purchase for your need....green +20 = 21-30, Yellow +30 = 31-40 and Blue +40 = 41-50.
03-30-2012 | 01:49 PM
#9183
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
03-30-2012 | 01:59 PM
#9184
We are doing our best to take care of our customer in USA. As an American, of course I will do my very best to provide my best effort for all of our Speed Passion customer, thru out our website, dealer and on Rctech.
However, it is almost impossible to provide a 1 year warranty of racing products. I actually don't see any industry standard on racing RC products that provide more then 120 days warranty. (Yes, I have checked all the big boys brand...) If you registered your SP ESC thru our website, you will get the bonus 30 days warranty that is = 120 days for our entire line of ESC.
Motor is the different thing...it is just way too easy to fried a motor. However, we do listen to our customer and we do provide the necessary service and warranty with special case. Which I did alot..........I know 1 thing, SH_T does happen....especially when you are racing it.
However, it is almost impossible to provide a 1 year warranty of racing products. I actually don't see any industry standard on racing RC products that provide more then 120 days warranty. (Yes, I have checked all the big boys brand...) If you registered your SP ESC thru our website, you will get the bonus 30 days warranty that is = 120 days for our entire line of ESC.
Motor is the different thing...it is just way too easy to fried a motor. However, we do listen to our customer and we do provide the necessary service and warranty with special case. Which I did alot..........I know 1 thing, SH_T does happen....especially when you are racing it.
Probably a leader warranty wise from a racing perspective would be Viper RC. 1 year on the ESC, 6 months on the motor from what I understand.
I trust your products enough that I spend the dollars on them as I know they will last longer than 90 days. If I didn't think that, I wouldn't. Part of the reason I made the switch from Castle stuff which have a year warranty.
If I could even purchase an extended warranty I would be interested.
Anyway, hopefully Speed Passion in general will see it differently again (I say again as I was once advised it would be 1 year in the USA when Shawn was with SP if I recall correctly)
03-30-2012 | 02:45 PM
#9185
V3 competition motors and V3 1cell competition motors came with stock 0-10* (black sensor board)
All MMM motors came with red sensor, 11-20*.
And yes, all the other sensors are optional that you can purchase for your need....green +20 = 21-30, Yellow +30 = 31-40 and Blue +40 = 41-50.
All MMM motors came with red sensor, 11-20*.
And yes, all the other sensors are optional that you can purchase for your need....green +20 = 21-30, Yellow +30 = 31-40 and Blue +40 = 41-50.
My problem is I was planning to buy new this time around. I like the V3 design where the motor connection points are on the end ball and not on the top like say Novak or Fantom so it won't interfere if I use the motor on my Losi Type R.
Back on the prowl for a used motor now I guess. Thanks.
03-30-2012 | 02:59 PM
#9186
Joined: Jan 2004
Posts: 5,058
From: Rockville, MD
Just like what Burgboyz said, MMM came with +10 (that means it adjust from 11-20*) board...not +20*. +20* board is 21-30* and is green in color.
If you are running BOOST software, I don't think you will ever need the green board. Anything beyond 20* timing on motor is for BLINKY no timing software racing.
If you are running BOOST software, I don't think you will ever need the green board. Anything beyond 20* timing on motor is for BLINKY no timing software racing.
need to proof read next time.
03-30-2012 | 03:25 PM
#9187
03-31-2012 | 12:42 AM
#9188
Tech Master
iTrader: (1)
Joined: Feb 2009
Posts: 1,920
How are you guys getting on with the 323 stock softwere and mod motors ??
i think i will be fitting it to my TF6 with my MMM 4.5 to go blasting
03-31-2012 | 03:01 AM
#9189
17.5 boosted MMM settings
for any one who may be interested these are the setting i raced with at the state titles this year 17.5 boosted small technical indoor carpet track.
overall performed extremely well qualified 4th and finished 2nd overall
overall performed extremely well qualified 4th and finished 2nd overall
03-31-2012 | 02:00 PM
#9190
I've been running 323_Stock and mod motors all season. It's such an awesome combo. The speedo is so smooth, and you can really control the power band. I usually run a 5.0t, but I also run a 4.0t at the larger tracks.
03-31-2012 | 04:56 PM
#9191
Tech Initiate
Joined: Mar 2008
Posts: 47
Any link to speedo setups? On speedpassion site only 1 whith 205g MMM4.5 from Marc that i already tried out, and didnt work whith me.
Thanks in advance.
Last edited by kavajas; 03-31-2012 at 05:06 PM.
04-01-2012 | 03:34 AM
#9193
Thank you for fast replay i will give it a try, should i start whith defaults first on 323? Any setup detail on that condicions?
Any link to speedo setups? On speedpassion site only 1 whith 205g MMM4.5 from Marc that i already tried out, and didnt work whith me.
Thanks in advance.
Any link to speedo setups? On speedpassion site only 1 whith 205g MMM4.5 from Marc that i already tried out, and didnt work whith me.
Thanks in advance.
04-01-2012 | 11:04 AM
#9194
Tech Initiate
Joined: Feb 2012
Posts: 26
From: London
Hey everyone
I have the speed passion 2.0 pro with speed passion 10.5 turn mmm motor, i am trying to program for the first time, it says in the manual that there are 15 items on the program card however my program card only seems to go to 10
anyone shed any light on this?
wondering if i need a differant program card, seems odd they would provide one that doesnt cover the full range of features....
I have the speed passion 2.0 pro with speed passion 10.5 turn mmm motor, i am trying to program for the first time, it says in the manual that there are 15 items on the program card however my program card only seems to go to 10
anyone shed any light on this?wondering if i need a differant program card, seems odd they would provide one that doesnt cover the full range of features....
04-01-2012 | 11:31 AM
#9195
Hey everyone
I have the speed passion 2.0 pro with speed passion 10.5 turn mmm motor, i am trying to program for the first time, it says in the manual that there are 15 items on the program card however my program card only seems to go to 10 anyone shed any light on this?
wondering if i need a differant program card, seems odd they would provide one that doesnt cover the full range of features....
I have the speed passion 2.0 pro with speed passion 10.5 turn mmm motor, i am trying to program for the first time, it says in the manual that there are 15 items on the program card however my program card only seems to go to 10
anyone shed any light on this?wondering if i need a differant program card, seems odd they would provide one that doesnt cover the full range of features....
http://www.speedpassion.net/en/produ...=SPLCD01&c=OPT