RC10B4.1 FT/WC
02-02-2012 | 02:22 PM
02-02-2012 | 02:27 PM
Joined: Nov 2004
Posts: 2,974
From: Norwood, OH...and CCRCR and The OhioRCFactory
Caster blocks, steering blocks, and a spare set of rear arm mounts.
02-02-2012 | 02:44 PM
About to finally get the mods i need in a couple weeks so i can use any traxxas rim or drift car rim they make..(useing the front castor block/steering knuckle/titanium stem for a hpi blitz or firestorm) also after months of searching i found a site that sells aluminum rims any color and a few styles regular or off set for 12mm hex for rubber or foam tires.. going foam for more speed and balance.. and so they wont balloon after 60 mph..
02-02-2012 | 03:20 PM
I installed the Losi BB spring on my car last night with silver front and yellow rear (no binding issues). The car feels much more planted, also felt much smoother. I was able to go from a 15.9 to a 15.6. Car feels AWESOME.
02-02-2012 | 04:00 PM
What I was able to notice was that it landed the bigger jumps a lot smoother. Almost completely eleminated chassis slap. And this one might just be all in my head, but I felt like I was able to push the car a little harder while staying consistant. Plus, springs not rubbing the shock bodies is pretty sweet too.
02-02-2012 | 04:07 PM
I just ran mine for the first time today. I wish I could have gotton lap times to compare but they changed the layout
What I was able to notice was that it landed the bigger jumps a lot smoother. Almost completely eleminated chassis slap. And this one might just be all in my head, but I felt like I was able to push the car a little harder while staying consistant. Plus, springs not rubbing the shock bodies is pretty sweet too.
What I was able to notice was that it landed the bigger jumps a lot smoother. Almost completely eleminated chassis slap. And this one might just be all in my head, but I felt like I was able to push the car a little harder while staying consistant. Plus, springs not rubbing the shock bodies is pretty sweet too.
02-02-2012 | 04:19 PM
ok I know this has been discussed before but to wrap it up... when running BB springs (losi) you need dilver,orange front and yellow, white and maybe pink rears, and also rpm collars for the lower end with ghea adjusters on top?
02-02-2012 | 04:25 PM
Thats exactly what I have except I bought Losi cups.
02-02-2012 | 04:27 PM
For springs I got silver and orange for the front and pink and yellow for the rear. However I don't think I will ever use the oranges up front. I may switch to yellow in the back when I run on med bite tracks.
I live a sheltered life
02-02-2012 | 05:01 PM
well im trying to turn turnbuckles gold but its not working
the simple green fizzes and bubles but when i take it out after 35 seconds its still the same color..7 9v + in water...anything else that could be wrong?
the simple green fizzes and bubles but when i take it out after 35 seconds its still the same color..7 9v + in water...anything else that could be wrong?
Last edited by B.A. Racer; 02-02-2012 at 05:18 PM.
02-02-2012 | 05:06 PM
I think you may not be using enough juice. I used 8-9v batteries together when doing mine years ago with simple green. Try that.