Great...I bought a 4.5 SP MMM
Well let's wait for the new speedos to come and will see what to do them...
Thanks for the help.

Can the USB LCD program card as suppiled with xtreme stock esc work on hobbywing ezrun 35A ESC ?

as i am running both esc, on tamiya mini, and xray t2.

yes but the xtreme stock has not got a built in booster you need to run an external booster or a rx pack .It will run perfectly on the 1s cut off with 930 stock and mod with the v3 508 no as we havent finished the upgrade yet .

have not been following this thread, but is this the new V3 that I have been hearing about for the last 6 months?

Definetly not the V3

I wonder if it is even made by Hobbywing.

Not a the v3 or even made by hobbywing.this is made by ztw for sp.we only make the gt series 2.1 for sp.

Like many big kids at Christmas i have Santa's money burning a hole in my pocket. Unfortunately for HW an Orion R10 pro is coming my way but at least hobbywing made some money out of me OEM style instead of all of it as i would have preferred to be bolting in a new V3.

Everyone can rest assured now that i have made this purchase the new V3 will be released shortly

Hi to all
Mate's i want to ask for help with setup for onroad
HOBBYWING EXTREME (EBAY ? cOULD BE FAKE)
MOTOR hOBBYWING 10.5 SENSORED (RC MART ?)
SOFTWARE LOADED 110930 STOCK ( NO SETTINGS CHANGED)

5.11 FDR SAKURA ZERO
RAN IT LIKE THAT ON ASPHALT (BASHING) INCREDIBLE HOLY SMOKE IT GOES
LIKE STINK (THE HW IS REPLACING MY VIPER 17.5 BLINKY SETUP.

NOW I NEED TO FINE TUNE PLEASE GIVE INPUT AND IDEAS

Got a problem with my extreme stock, set it up initially with forward/reverse, worked great. Now it only has forward only.

I've tried to reload the firmware with forward only and then again with forward/reverse, still only getting forward only.

Also got a problem when it I set it up with 3.0v protection (running 1 cell), unable to calibrate to Tx. As soon as I take voltage protection off it calibrates fine. Using 1.64.

Any help appreciated.

What was the heat like on the motor? The fdr seams high. I would go down to nearer 6.5 or 7? Now familiar with your car though.

Hello, me again

Last weekend we had the last race on our club, my car was not good at all, I tried many settings on the speedo but they didn't seem to work well.
I was using a SP MMM 10.5T brand new but the top speed was similar to a 17.5T.
The case is that on monday, I pluged the PRO LCD (I am using my existing SP one) on the car and them pluged on the PC and turned it on, so them I discovered how to change properly the program and saw that the whole weekend I was using a MOD software on it.
Change to 119 software and today went to the track again, the plans was to spend the whole day trying new speedo and car setup for the next year, but the car behaved like a 17.5T, I am really disapointed and don't know what to do really.
Any clues?

have u tried the latest f/ware, 930?

use 930 stock software instead of mod

No, I didn't, but should have worked with 119, at least that is what I think.
Will try, got nothing to lose.