looking at tlr springs for the front of the truck...

ae
silver 3.22
blue 3.56
gold 3.70

losi
silver 3.2 TLR5181
green 3.5 TLR5182
blue 3.8 TLR5183

I threw on the Losi silvers on the front of my T4.1 last night. You will probably need to use the large spacer that comes with the RPM kit and place it inbetween the AE collar and the RPM retainer (depending on your setup/shock limiters). Otherwise, the spring is too short and the treaded shock collar will run out of threads.

What set up do you run and what are your track conditions?

PS. GO PACK GO!!

I run on a very tight indoor track (68x40) which has med/high grip. Typically run BK bar/Barcodes. Just got back into truck, so I'm still trying to find a setup. I posted a few pages back, in hopes of getting some setups from the AE guys who watch this site, but no luck.

Go Pack!

The T4.1 box setup is really good! If I were you id start there and just run it. If you are lacking somewhere on your track, ask and we'll help.

I'm still trying to learn all the new tires and their names and tread patterns... Is there a rear buggy tire that has a similar tread pattern as the Barcode fronts?

AKA Rebar is the closest thing.

I would say rebars are the closest

Losi Taper Pin is a LOT closer than the Rebar
Barcode

Rebar

Taper Pin


Tapers are the OG.

Thanks. yeah I know about Tapers.... they were around back in the day but I was just curious as to what is out there. I actually think Flip Outs will be closer to what I'm looking for, although the tread pattern is not the same.

Thanks

You considered X3000s?

its because you put a buggy spring on the front, losi has different numbers for the truck front because its longer, and its no longer just using the stiff buggy rears on the front hah.

http://www.losipartshouse.com/servle...Spring,/Detail

He is talking rears. Can you even buy rear taper pins anymore?? Some old goodies there!!!

Yes

My LHS has at least 10 sets of them, LOL. Comes with some extra dust too