thanks. Hope the esc gets here tomorow

I just switched over to Brushlesshobbies 120 amp esc's in everything I run. Previously ran all Tekin but after a few talks on the phone with the owner I had to give them a shot. Not saying there is anything wrong with Tekin. I know it has been said that these are rebadged HW esc's.. But from the info I got from Stan they are not. They might share the same style case but he has made some hardware changes and his software is the one you should run. I just wanted to get this out there. That being said these are really good. I di wish they had black battery and motor wires but hey you cant have your cake and eat it too.

Got my Brushlesshobbies 120 amp today. To bad I had gone to the track before it got here. Easy to set up and program. Love all the options. the throttle responce is very smooth. I can tell I will be very happy.

My HK 100a sensored esc on my jammin went into a thermal shut down today. it worked fine after it cooled down, it wasnt hot out and I was just bashing aroung with a buddy not running hard at all. have been running the same gearing for a long time. I am thinking i might be running to the end of days for the HK

Looks like I might have a good replacement if needed with the Brushlesshobbies 120 amp if needed

Anyone here know whether i use the toro sc 120a esc with 1/10 toro ares motor? is it compatible? thanks

The toro motor and esc should be fine. Don't know much about them but they should be compatible. No reason they won't work together

Is the Tacon 2150 sensored? I'm running a borrowed T8/RX8 and was thinking of giving the Tacon a try.

^well?

those big tacons motors are sensorless...dont know if the RX8 will run sensorless or not