for buggy my Clocked Plus4 will rock.....

http://www.clockworkracingengines.co...ovplus21-4btta

You want to be under $300 this is the perfect engine.

http://www.amainhobbies.com/product_...n-Buggy-Engine

I've been looking at the o.s. 21 xzb but I have heard they don't last past 2 gallons. And the bearing in the back goes bad pretty fast.

Great choice for a buggy keith

Let me know if I can do anything for ya

Yeah

I've been looking at your site Houston. The 4T tuned what do you do to the engine?

Plus 21-4T is factory tuned

If you want any other services I would recommend silicone filled crank at least, houston tuned is an engine modification service if you wish to choose for a "modified" engine , theres also a bench break in service that cuts break in time in half

Just lmk if you need anything Keith

I own 2 of them, the first one went 3 gallons before I pulled the sleeve and had it pinched ($15).. It now has 6 gallons total and still running strong on the stock bearings.

The second one went 4 gallons before I got a deal on a speed sleeve and piston. Stock crank and bearings in it and it's still running strong with 4 gallons on the P/S and 8 on the crank and stock bearings.

I bought both of these 5 months apart from 2 different places. I don't get lucky ever in my life, that's just how it is for me. I might stumble on some nice deals sometimes but thats about it. I got the speed P/S brand new for $100 bones.. I think the $15 I spent on the one for what it's been through is just fine.

The ascendancy g5 and precirotate motor would be good in a buggy. i have been running them for a while now. with no problems and for under 300 bucks. u can get the precirotate pr21c modified 3port for 175 bucks on amain and the g5 for a lil over 200 bucks

Where can I get one in the US?

contact jason or nate at ascendancyrc. [email protected]. he will get you square away really good guy to deal with. when my precirotate motors go thats what i am going to s3 is a headed (v-spec and the s7 is a black head speed