Originally Posted by
offtraxx
I have the same bouncing issue. I posted on here last week and got a reply saying the rear shock o-ring (x-rings) are binding up the shock. I removed the upper ring and swapped the bladder out for the seal. I finaly have time today to test it after working 70 hrs last week.
I will report back tonight
These shocks take a little work to get super smooth. I polished the shock shafts, and made sure none of the pistons are dragging on the shock body as I had two that were doing this, I just lightly sanded the pistion with 800 paper to knock the edge off a bit and then rebuilt shocks with seal instead of bladder. I also removed the shock boots. My truck is planted and does not bounce at all. I also am running 2mm bars front and rear. Very happy with the truck.