Originally Posted by
Miniracer23
Quick question. I'm ordering a B5 w/ a 2057 for a back-up. I normally run odo97T plugs. What are good "go to" needle settings after break. I'm usually a Nova guy but heard so many good things about this engine, and the price is right. Just like to have a good base line setting for race tune. Thanks
From the stock flush high and flush low A race tune obviously will vary a bit depending on location,temp,etc.. but the ballpark with the 2057 pipe and WERKS 30% is 1-11/2 turn in on top and half turn to 1 turn in on bottom. These will not be exact but will be in the ball park.