Originally Posted by
M1Combat
Did you rebuild the dampers while you were setting it up?
Originally Posted by
mojoman81
I had this setup in mine and I think its to much motor for racing . I also trashed a set of bearings and striped out a hex . If you have expo mess with that or use the castle link to turn the punch down. If its not running hot gear it up . I was running mine 24/81 with no prob .
The shocks, v2 unthreaded, were in good shape. I refilled them w/ 30w.
I've been able to get away w/ the castle 3800 for a while now, but that was 4x4SC club racing. Thought I could make it work in the 2wd, I'm afraid I was mistaken.
I'm looking at the sensored options, probably 10.5 or 13.5.
I had the expo jacked way up, and same w/ the punch control. Until I find something else, I'll try running the punch control all the way up, and maybe try the torque test deal. Tried it once and it didn't seem to work, I'll try again.
Gearing is 23/87.
Thanks for the help....