walterheard

iTrader: (31)

Is there really a difference between the +3mm wheels and the stock wheels that go on the SC ?

MarkA

iTrader: (21)

Is it world-changing? No. Is there a difference? Yes. The change will be most noticeable on higher-bite surfaces where the wider car will roll noticeably less.

walterheard

iTrader: (31)

I put a +3mm offset next to a stock wheel, visibly there isnt a difference

lbenton

iTrader: (48)

If you change the offset you can end up with tire rubbing on something.

Push them out and you can rub the body.
Pull them in and the fronts can rub the arms in full lock turns.

Hoese37

iTrader: (5)

The one has a 3mm offset. That's the difference. Makes the width 3mm wider per side or 6 mm overall.

walterheard

iTrader: (31)

So I wouldnt be able to see the difference with my eyes?

MarkA

iTrader: (21)

It is only wider when it is on the truck, not when just holding them up next to each other.

An explanation of wheel offset from a full-scale site that applies to RC exactly the same: https://www.tirerack.com/wheels/tech...jsp?techid=101